Iterative Development, Validation and Benchmarking of Custom-Built EEG, sEMG and fNIRS Sensors
Technical Annals · 28.04.2026 · 2 (4)
DOI: 10.12681/ta.46109 ↗Kurz gefasst
Fachartikel in der Zeitschrift Technical Annals, online erschienen am 28.04.2026. Verfasst von Maria Michailidou und 9 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
This paper presents an iterative hardware development for three custom biomedical sensing modalities of electroencephalography (EEG), surface electromyography (sEMG) and functional near-infrared spectroscopy (fNIRS). The presented work is motivated by the need for accessible, modifiable and easily reproducible hardware sensing platforms for neuroengineering, rehabilitation research and education, where commercial systems may be costly, closed source or difficult to prototype with. The hardware devices are developed as modular printed circuit board assemblies that separate low noise analog acquisition, digital control, wireless communication, optical driving, photodetection and electrode interfacing. For EEG, the design of a custom Teensy board programmable with the Arduino IDE, capable of 600 MHz sampling and built with VR prototyping in mind.. For the fNIRS device, the architecture separates the DAQ board, the LED controller, and the photodiode flex board. For sEMG, a low cost analog board with both flexible and rigid electrodes was designed for easy data acquisition of sEMG signals. A more robust, sEMG board for running ML classification models on the edge was developed using the STM32H7 as well. Validation is organized around engineering tests, biomedical signal-acquisition protocols and benchmarking against commercial or established low-cost references. The current results are primarily design and prototype level, including bill-of-materials analysis, manufacturability assessment and validation planning.
Zitieren
APA
Michailidou, M., Fiska, V., Mantiou, V., Mitsopoulos, K., Machairas, I., Vasilopoulos, V., Moraitopoulos, A., Chondroudis, O., Bamidis, P. D., & Athanasiou, A. (2026). Iterative Development, Validation and Benchmarking of Custom-Built EEG, sEMG and fNIRS Sensors. Technical Annals, 2(4). https://doi.org/10.12681/ta.46109
Vancouver
Michailidou M, Fiska V, Mantiou V, Mitsopoulos K, Machairas I, Vasilopoulos V, et al. Iterative Development, Validation and Benchmarking of Custom-Built EEG, sEMG and fNIRS Sensors. Technical Annals. 2026;2(4). doi:10.12681/ta.46109
BibTeX
@article{Michailidou2026,
author = {Michailidou, Maria and Fiska, Vasiliki and Mantiou, Vasiliki and Mitsopoulos, Konstantinos and Machairas, Ilias and Vasilopoulos, Vasileios and Moraitopoulos, Alexandros and Chondroudis, Odysseas and Bamidis, Panagiotis D. and Athanasiou, Alkinoos},
title = {Iterative Development, Validation and Benchmarking of Custom-Built EEG, sEMG and fNIRS Sensors},
journal = {Technical Annals},
year = {2026},
volume = {2},
number = {4},
doi = {10.12681/ta.46109}
}
EUVIMED