Design of a Resonant Converter Control Loop using Psim and Smartctrl Software
Technical Annals · 26.01.2026 · 2 (3)
DOI: 10.12681/ta.44753 ↗Kurz gefasst
Fachartikel in der Zeitschrift Technical Annals, online erschienen am 26.01.2026. Verfasst von Andreas Topalis. Die Arbeit nennt 7 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
An approach on how to design controllers for a bidirectional tuned converter of the CLLLC arrangement is presented in this paper. The ability to achieve zero current switching (ZCS) in all components of this architecture, combined with the ability to operate at very high frequencies, results in improved overall system efficiency. However, the transient behavior of this converter is strongly load dependent, which complicates the design of closed-loop voltage and current regulators. The oscillation noted within the arrangement stems mainly from the Q-factor of resonance being quite large, a feature demonstrably present on the Bode diagram when the loop is open. In this paper, a comprehensive approach to the design of the controller is presented, which takes into account the dynamic response parameters arising from load fluctuations. The robustness of the controlled system will be judged over the entire frequency range in which the switching operation occurs. There will be an extensive report and detailed investigation of both the energy disposal processes in the storage device and the corresponding storage (regeneration) processes. The core novelty presented in this research pivots upon pinpointing the most challenging operational regimes for the converter. This target will be met by employing a systemic approach to modeling and subsequent analysis. Moreover, the choice of the appropriate controller will directly stem from these identified operational characteristics. The verification via the step response demonstrated that, as constructed, the system maintains stability, thus validating the dependability of the control design methodology we put forth.
Zitieren
APA
Topalis, A. (2026). Design of a Resonant Converter Control Loop using Psim and Smartctrl Software. Technical Annals, 2(3). https://doi.org/10.12681/ta.44753
Vancouver
Topalis A. Design of a Resonant Converter Control Loop using Psim and Smartctrl Software. Technical Annals. 2026;2(3). doi:10.12681/ta.44753
BibTeX
@article{Topalis2026,
author = {Topalis, Andreas},
title = {Design of a Resonant Converter Control Loop using Psim and Smartctrl Software},
journal = {Technical Annals},
year = {2026},
volume = {2},
number = {3},
doi = {10.12681/ta.44753}
}
EUVIMED