A Method for the Tensile Strength Prediction of Tablets with Differing Powder Plasticities
Chemical and Pharmaceutical Bulletin · 09.04.2024 · 72 (4) · 374-380
DOI: 10.1248/cpb.c24-00090 ↗Kurz gefasst
Fachartikel in der Zeitschrift Chemical and Pharmaceutical Bulletin, erschienen am 09.04.2024. Verfasst von Takeru Yano und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Osaka Metropolitan University. Hauptthemen laut MEDLINE: Chemistry, Pharmaceutical. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 43 Literaturangaben.
Abstract (Originalsprache)
Tablets are the most commonly used dosage form in the pharmaceutical industry, and their properties such as disintegration, dissolution, and portability are influenced by their strength. However, in industry, the mixing fraction of powders to obtain a tablet compact with sufficient strength is determined based on empirical rules. Therefore, a method for predicting tablet strength based on the properties of a single material is required. The objective of this study was to quantitatively evaluate the relationship between the compression properties and tablet strength of powder mixtures. The compression properties of the powder mixtures with different plasticities were evaluated based on the force-displacement curves obtained from the powder compression tests. Heckel and compression energy analyses were performed to evaluate compression properties. During the compression energy analysis, the ratio of plastic deformation energy to elastic deformation energy (Ep/Ee) was assumed to be the plastic deformability of the powder. The quantitative relationship between the compression properties and tensile strength of the tablets was investigated. Based on the obtained relationship and the compression properties of a single material, a prediction equation was put forward for the compression properties of the powder mixture. Subsequently, a correlation equation for tablet strength was proposed by combining the values of K and Ep/Ee obtained from the Heckel and compression energy analyses, respectively. Finally, by substituting the compression properties of the single material and the mass fraction of the plastic material into the proposed equation, the tablet strength of the powder mixture with different plastic deformabilities was predicted.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Chemical Engineering, Osaka Metropolitan University.
Zitieren
APA
Yano, T., Oshiro, A., Ohsaki, S., Nakamura, H., & Watano, S. (2024). A Method for the Tensile Strength Prediction of Tablets with Differing Powder Plasticities. Chemical and Pharmaceutical Bulletin, 72(4), 374-380. https://doi.org/10.1248/cpb.c24-00090
Vancouver
Yano T, Oshiro A, Ohsaki S, Nakamura H, Watano S. A Method for the Tensile Strength Prediction of Tablets with Differing Powder Plasticities. Chemical and Pharmaceutical Bulletin. 2024;72(4):374-380. doi:10.1248/cpb.c24-00090
BibTeX
@article{Yano2024,
author = {Yano, Takeru and Oshiro, Atsushi and Ohsaki, Shuji and Nakamura, Hideya and Watano, Satoru},
title = {A Method for the Tensile Strength Prediction of Tablets with Differing Powder Plasticities},
journal = {Chemical and Pharmaceutical Bulletin},
year = {2024},
volume = {72},
number = {4},
pages = {374--380},
doi = {10.1248/cpb.c24-00090}
}
EUVIMED