Optimization of porosity behavior of hybrid reinforced titanium metal matrix composite through RSM, ANN, and GA for multi-objective parameters
Journal of Engineering and Applied Science · 2024-12 · 71 (1)
DOI: 10.1186/s44147-024-00436-4 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Engineering and Applied Science, online erschienen am 15.05.2024. Verfasst von Birhane Assefa Gemeda und 3 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Titanium matrix composites (TMCs) have high specific strength and stiffness, and high-temperature TMCs can reduce weight by up to 50% when compared with monolithic super alloys while preserving equal stiffness and strength in jet engine systems for propulsion. The purpose of this work examines the use of mathematical models and learning approaches to optimize response such as porosity and control variables in synthesized hybrid titanium metal matrix composites (HTMMCs) reinforced by B 4 C-SiC-MoS 2 -ZrO 2 . To further understand the impacts of process factors on porosity reduction, the study employs methodologies such as the response surface methodology (RSM), integrated artificial neural networks (ANN), and genetic algorithm (GA). The findings indicate that these strategies have the potential to contribute to the industry. The optimal combination of 7.5wt.% SiC, 7.5wt.% B 4 C, 7.5wt.% ZrO 2 , 4wt.% MoS 2 , and 73.5wt.% Ti compositions was determined utilizing process factors such as milling period (6h), compaction pressure (50MPa), compact duration (50min), sintering temperature (1200°C), and sintering time (2h) as compared to pure Ti grade 5. The mechanical properties of the optimum combination of reinforcement weight percentage and process parameters resulted in a minimum porosity of 0.118%, density of 4.36gcm 3 , and micro-hardness of 63.4HRC boosted by 1.76%, and compressive strength of 2500MPa increased by 2.6%. In addition, these HTMMCs had a minimal wear rate of 0.176mm 3 /Nm and a corrosion resistance rate of 2.15×10-4mmpy. The investigation result analysis discovered that the RSM and combined ANN-GA models considerably enhanced the forecasting of multidimensional interaction difficulties in composite material production that were highly statistically connected, with R 2 values of 0.9552 and 0.97984. The ANN-GA model provided a 95% confidence range for porosity predictions, which increased the production use of titanium-based particle composites. Furthermore, HMMCs can be utilized in the automotive and aviation industries with enhanced corrosion and wear resistance.
Zitieren
APA
Gemeda, B. A., Sinha, D. K., Mengesha, G. A., & Gautam, S. S. (2024). Optimization of porosity behavior of hybrid reinforced titanium metal matrix composite through RSM, ANN, and GA for multi-objective parameters. Journal of Engineering and Applied Science, 71(1). https://doi.org/10.1186/s44147-024-00436-4
Vancouver
Gemeda BA, Sinha DK, Mengesha GA, Gautam SS. Optimization of porosity behavior of hybrid reinforced titanium metal matrix composite through RSM, ANN, and GA for multi-objective parameters. Journal of Engineering and Applied Science. 2024;71(1). doi:10.1186/s44147-024-00436-4
BibTeX
@article{Gemeda2024,
author = {Gemeda, Birhane Assefa and Sinha, Devendra Kumar and Mengesha, Getinet Asrat and Gautam, Satyam Shivam},
title = {Optimization of porosity behavior of hybrid reinforced titanium metal matrix composite through RSM, ANN, and GA for multi-objective parameters},
journal = {Journal of Engineering and Applied Science},
year = {2024},
volume = {71},
number = {1},
doi = {10.1186/s44147-024-00436-4}
}
EUVIMED