EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Fast and accurate distal locking of interlocked intramedullary nails using computer-vision and a 3D printed device

Zakaria Chabihi, Nizar Nouidi, Brahim Demnati, Mohamed Amine Benhima, Imad Abkari

3D Printing in Medicine · 07.08.2024 · 10 (1)

DOI: 10.1186/s41205-024-00221-2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift 3D Printing in Medicine, online erschienen am 07.08.2024. Verfasst von Zakaria Chabihi und 4 weiteren Autor:innen. Beteiligte Einrichtung: Trauma and Orthopedics Department B, Mohammed VI University Hospital, Marrakesh, Morocco. z.chabihi@gmail.com. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

INTRODUCTION: Distal locking is a challenging and time-consuming step in interlocked intramedullary nailing of long bone fractures. Current methods have limitations in terms of simplicity, universality, accuracy, speed, and safety. We propose a novel device and software for distal locking using computer vision. METHODS AND MATERIALS: The device consists of an universal ancillary clamp, a telescopic arm, a viewfinder clamp, and a radio-opaque cross. The software uses a camera photo from the C-arm intensifier and adjusts for geometric projection deformities. The software employs edge detection, Hough transform, perspective interpolation, and vector calculation algorithms to locate the distal hole center. The device and software were designed, manufactured, and tested using 3D CAD, FEM, DRR, and performance testing on phantom bones. RESULTS: The device and software showed high accuracy and precision of 98.7% and 99.2% respectively in locating the distal hole center and calculating the correctional vector. The device and software also showed high success ratio in drilling the hole and inserting the screw. The device and software reduced the radiation exposure for the surgeon and the patient. The success ratio of the device and software was validated by the physical testing, which simulated the real clinical scenario of distal locking. The radiation exposure was as low as 5 s with a radiation dose of 0.2mSv, drastically reducing radiation exposure during distal locking. DISCUSSION: Our device and software have several advantages over other distal locking methods, such as simplicity, universality, accuracy, speed, and safety. Our device and software also have some disadvantages, such as reliability and legislation. Our device and software can be compared with other distal locking methods based on these criteria. Our device and software have some limitations and challenges that need to be addressed in the future, such as clinical validation, and regulatory approval. CONCLUSION: The device showed promising results in terms of low-cost, reusability, low radiation exposure, high accuracy, fast distal locking, high stiffness, and adaptability. The device has several advantages over other distal locking techniques, such as free-hand technique, mechanical aiming devices, electromagnetic navigation systems, and computer-assisted systems. We believe that our device and software have the potential to revolutionize the distal locking technique and to improve the outcomes and quality of life of the patients with long bone fractures.

Schlagwörter

Stichwörter der Autor:innen

3D printingAdditive manufacturingComputer visionDistal lockingInterlocked intramedullary nailsMobile application

Autor:innen und Institutionen

  • Trauma and Orthopedics Department B, Mohammed VI University Hospital, Marrakesh, Morocco. z.chabihi@gmail.com.
  • Laboratory of clinical and epidemiological research in bone and joint pathology, Cadi Ayyad University, Marrakesh, Morocco. z.chabihi@gmail.com.
  • Trauma and Orthopedics Department B, Mohammed VI University Hospital, Marrakesh, Morocco.
  • Chemistry-Biochemestry, Environment, Nutrition and Health laboratory, FMPC, Hassan II University Casablanca, Casablanca, Morocco.
  • Laboratory of clinical and epidemiological research in bone and joint pathology, Cadi Ayyad University, Marrakesh, Morocco.

Zitieren

APA

Chabihi, Z., Nouidi, N., Demnati, B., Benhima, M. A., & Abkari, I. (2024). Fast and accurate distal locking of interlocked intramedullary nails using computer-vision and a 3D printed device. 3D Printing in Medicine, 10(1). https://doi.org/10.1186/s41205-024-00221-2

Vancouver

Chabihi Z, Nouidi N, Demnati B, Benhima MA, Abkari I. Fast and accurate distal locking of interlocked intramedullary nails using computer-vision and a 3D printed device. 3D Printing in Medicine. 2024;10(1). doi:10.1186/s41205-024-00221-2

BibTeX
@article{Chabihi2024,
  author = {Chabihi, Zakaria and Nouidi, Nizar and Demnati, Brahim and Benhima, Mohamed Amine and Abkari, Imad},
  title = {Fast and accurate distal locking of interlocked intramedullary nails using computer-vision and a 3D printed device},
  journal = {3D Printing in Medicine},
  year = {2024},
  volume = {10},
  number = {1},
  doi = {10.1186/s41205-024-00221-2}
}
Kostenlos starten →