Numerical evaluation of internal femur osteosynthesis based on a biomechanical model of the loading in the proximal equine hindlimb
BMC Veterinary Research · 2024
DOI: 10.1186/s12917-024-04044-5 ↗Kurz gefasst
Fachartikel in der Zeitschrift BMC Veterinary Research, 2024. Verfasst von Jan J Lang und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopedics and Sports Orthopedics, Klinikum rechts der Isar, TUM School of Medicine, Technical University of Munich, Munich, Germany. …. Hauptthemen laut MEDLINE: Femoral Fractures, Fracture Fixation, Internal, Hindlimb. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technische Universität München.
Abstract (Originalsprache)
Femoral fractures are often considered lethal for adult horses because femur osteosynthesis is still a surgical challenge. For equine femur osteosynthesis, primary stability is essential, but the detailed physiological forces occurring in the hindlimb are largely unknown. The objective of this study was to create a numerical testing environment to evaluate equine femur osteosynthesis based on physiological conditions. The study was designed as a finite element analysis (FEA) of the femur using a musculoskeletal model of the loading situation in stance. Relevant forces were determined in the musculoskeletal model via optimization. The treatment of four different fracture types with an intramedullary nail was investigated in FEA with loading conditions derived from the model. The analyzed diaphyseal fracture types were a transverse (TR) fracture, two oblique fractures in different orientations (OB-ML: medial-lateral and OB-AP: anterior-posterior) and a ”gap” fracture (GAP) without contact between the fragments. For the native femur, the most relevant areas of increased stress were located distally to the femoral head and proximally to the caudal side of the condyles. For all fracture types, the highest stresses in the implant material were present in the fracture-adjacent screws. Maximum compressive (-348 MPa) and tensile stress (197 MPa) were found for the GAP fracture, but material strength was not exceeded. The mathematical model was able to predict a load distribution in the femur of the standing horse and was used to assess the performance of internal fixation devices via FEA. The analyzed intramedullary nail and screws showed sufficient stability for all fracture types.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Orthopedics and Sports Orthopedics, Klinikum rechts der Isar, TUM School of Medicine, Technical University of Munich, Munich, Germany. jan.lang@tum.de.
- Chair of Non-destructive Testing, TUM School of Engineering and Design, Technical University of Munich, Munich, Germany. jan.lang@tum.de.
- Department of Orthopedics and Sports Orthopedics, Klinikum rechts der Isar, TUM School of Medicine, Technical University of Munich, Munich, Germany.
- Institute for Machine Tools and Industrial Management, TUM School of Engineering and Design, Technical University of Munich, Munich, Germany.
- Munich Institute of Robotics and Machine Intelligence, Department of Electrical and Computer Engineering, Technical University of Munich, Munich, Germany.
- Department of Diagnostic and Interventional Neuroradiology, TUM School of Medicine, Technical University of Munich, Munich, Germany.
Förderung
- Technische Universität München
Zitieren
APA
Lang, J. J., Li, X., Micheler, C. M., Wilhelm, N. J., Seidl, F., Schwaiger, B. J., Barnewitz, D., von Eisenhart-Rothe, R., Grosse, C. U., & Burgkart, R. (2024). Numerical evaluation of internal femur osteosynthesis based on a biomechanical model of the loading in the proximal equine hindlimb. BMC Veterinary Research. https://doi.org/10.1186/s12917-024-04044-5
Vancouver
Lang JJ, Li X, Micheler CM, Wilhelm NJ, Seidl F, Schwaiger BJ, et al. Numerical evaluation of internal femur osteosynthesis based on a biomechanical model of the loading in the proximal equine hindlimb. BMC Veterinary Research. 2024. doi:10.1186/s12917-024-04044-5
BibTeX
@article{Lang2024,
author = {Lang, Jan J and Li, Xinhao and Micheler, Carina M and Wilhelm, Nikolas J and Seidl, Fritz and Schwaiger, Benedikt J and Barnewitz, Dirk and von Eisenhart-Rothe, Ruediger and Grosse, Christian U and Burgkart, Rainer},
title = {Numerical evaluation of internal femur osteosynthesis based on a biomechanical model of the loading in the proximal equine hindlimb},
journal = {BMC Veterinary Research},
year = {2024},
doi = {10.1186/s12917-024-04044-5}
}
EUVIMED