Fabrication of stable superamphiphobic coatings based on palygorskite nanorods for anti-adhesion and anti-icing
Clay Minerals · 18.06.2026 · 1-12
DOI: 10.1180/clm.2026.10036 ↗Kurz gefasst
Fachartikel in der Zeitschrift Clay Minerals, online erschienen am 18.06.2026. Verfasst von Jie Dong und 4 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben.
Abstract (Originalsprache)
Compared with superhydrophobic coatings, superamphiphobic coatings offer broader application potential in various fields. However, their practical applications are often hindered by insufficient repellency towards low-surface-tension, high-viscosity and complex multicomponent liquids, as well as by their stability. Herein, a palygorskite-based stable superamphiphobic coating with a simple fabrication process and low cost is reported. The coating was fabricated through sequential spray deposition of a fluorosilicone resin (FSR) bonding layer and a superamphiphobic functional layer composed of fluorinated palygorskite (F-PAL), fluorinated carbon black (F-CB) and FSR. In this coating, F-PAL nanorods serve as the building blocks for constructing the primary nanostructure, while F-CB nanoparticles occupy the interstitial spaces between the PAL nanorods, forming the secondary nanostructure. Together, these components generate a multiscale hierarchical micro-/nanostructure that is critical for achieving superamphiphobicity. By systematically optimizing the mass ratio of F-CB to F-PAL and the FSR content, a low-surface-energy multiscale hierarchical micro-/nanostructure was successfully established, imparting the coating with excellent superamphiphobicity towards water, hydroxyl-terminated polybutadiene/dioctyl sebacate mixtures (HTPB-H) and their aluminium powder-containing suspensions (HTPB-H/Al). The coating exhibits outstanding mechanical, chemical and thermal stability. Furthermore, the coating demonstrates remarkable anti-adhesion performance against both HTPB-H and HTPB-H/Al, together with superior passive anti-icing performance, as evidenced by a significantly prolonged freezing delay time (1291 s, ∼30-fold increase) and a substantially reduced ice adhesion strength (from 224.3 to 65.8 kPa). Moreover, efficient photothermal de-icing performance was achieved under low-temperature, high-humidity and weak-light conditions. These results demonstrate that the proposed superamphiphobic coating holds significant promise for practical applications in anti-adhesion and anti-icing under harsh conditions.
Zitieren
APA
Dong, J., Li, Y., Wei, J., Mao, M., & Zhang, J. (2026). Fabrication of stable superamphiphobic coatings based on palygorskite nanorods for anti-adhesion and anti-icing. Clay Minerals, 1-12. https://doi.org/10.1180/clm.2026.10036
Vancouver
Dong J, Li Y, Wei J, Mao M, Zhang J. Fabrication of stable superamphiphobic coatings based on palygorskite nanorods for anti-adhesion and anti-icing. Clay Minerals. 2026:1-12. doi:10.1180/clm.2026.10036
BibTeX
@article{Dong2026,
author = {Dong, Jie and Li, Ying and Wei, Jinfei and Mao, Mingyuan and Zhang, Junping},
title = {Fabrication of stable superamphiphobic coatings based on palygorskite nanorods for anti-adhesion and anti-icing},
journal = {Clay Minerals},
year = {2026},
pages = {1--12},
doi = {10.1180/clm.2026.10036}
}
EUVIMED