EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Fabrication and microstructural analysis of 3A21/7075 aluminum alloy cladding material based on impact jet solid–liquid compound casting

Hu Ming, Ren Xiaoxue, Sun Jianbo, Zhang Yunlong, Teng Chunfeng, Qiao Guang

Composites and Advanced Materials · 2021

DOI: 10.1177/2633366x20934485 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Composites and Advanced Materials, 2021. Verfasst von Hu Ming und 5 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Materials Science and Engineering Discipline Team of Jiamusi University, national outstanding youth science fund project of national natural science foundation of china, Collaborative Innovation Program of Jiamusi University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To solve thickness problem for high-strength aluminum alloy used as plastic mold materials and eliminate oxide film on the surface of aluminum alloy, a new compound casting, namely impact jet solid–liquid compound casting, was developed to fabricate 3A21/7075 aluminum alloy cladding material. Then, optical microscope (OM), electron-backscattered diffraction (EBSD) technique, and transmission electron microscope (TEM) together with energy-dispersive spectrometer (EDS) were used to analyze microstructure of 3A21/7075 aluminum alloy cladding material. The OM and EBSD results showed that the 3A21/7075 aluminum alloy cladding material was composed of 3A21 cladding layer, fusion zone (FZ), heat-affected zone, and 7075 matrix. The grain morphology on both sides of FZ had great differences. Moreover, the TEM and EDS results showed that the 3A21 cladding layer showed a bulk phase and lots of fine and dispersed granular phases, while the 7075 matrix appeared undetermined strip phases and amounts of fine and dispersed rod-like phases. Moreover, FZ existed a great deal of fine and dispersed granular phases and rod-like phases. The 3A21/7075 aluminum alloy cladding material could effectively solve the problems mentioned above and the in-depth analysis of microstructures of 3A21/7075 aluminum alloy cladding material was of great importance in terms of engineering value and academic significance.

Förderung

  • Materials Science and Engineering Discipline Team of Jiamusi University
  • national outstanding youth science fund project of national natural science foundation of china
  • Collaborative Innovation Program of Jiamusi University

Zitieren

APA

Ming, H., Xiaoxue, R., Jianbo, S., Yunlong, Z., Chunfeng, T., & Guang, Q. (2021). Fabrication and microstructural analysis of 3A21/7075 aluminum alloy cladding material based on impact jet solid–liquid compound casting. Composites and Advanced Materials. https://doi.org/10.1177/2633366x20934485

Vancouver

Ming H, Xiaoxue R, Jianbo S, Yunlong Z, Chunfeng T, Guang Q. Fabrication and microstructural analysis of 3A21/7075 aluminum alloy cladding material based on impact jet solid–liquid compound casting. Composites and Advanced Materials. 2021. doi:10.1177/2633366x20934485

BibTeX
@article{Ming2021,
  author = {Ming, Hu and Xiaoxue, Ren and Jianbo, Sun and Yunlong, Zhang and Chunfeng, Teng and Guang, Qiao},
  title = {Fabrication and microstructural analysis of 3A21/7075 aluminum alloy cladding material based on impact jet solid–liquid compound casting},
  journal = {Composites and Advanced Materials},
  year = {2021},
  doi = {10.1177/2633366x20934485}
}
Kostenlos starten →