EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Microstructure and mechanical properties of Ti-Ti 2 AlNb interface

Tao Niu, Bo Jiang, Ning Zhang, Yaoqi Wang

Composites and Advanced Materials · 2021

DOI: 10.1177/2633366x20929713 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Composites and Advanced Materials, 2021. Verfasst von Tao Niu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Diffusion bonding of Ti 2 AlNb alloy using pure titanium (Ti) foil as an interlayer was carried out on superplastic forming and diffusion bonding special equipment by gas pressure loading method. The microstructure of Ti-Ti 2 AlNb interface was observed using scanning electron microscope and energy-dispersive spectrometer while the mechanical properties of the joints were evaluated by shear test. The results show that the thickness of Ti foil interlayer has a great influence on the microstructure and shear strength of the interface diffusion region. When the thickness of the intermediate layer is thin (25 µm), Ti, aluminum (Al), and niobium (Nb) elements are fully diffused with uniform element distribution through the diffusion region. The diffusion layer region presents uniform, fine, and disordered lamellar α-Ti + β-Ti dual-phase structure with high shear strength. When the thickness of Ti foil interlayer is thick (50 µm), the distribution of Al elements is relatively uniform through the diffusion region due to its smaller radius and faster diffusion speed, and Ti and Nb elements present gradient distribution from the middle to both sides. The diffusion layer region presents a coarse and long strip shape α-Ti + β-Ti dual-phase structure in the middle part and a fine needle-like or irregular α-Ti + β-Ti dual-phase structure in both side parts, with slightly lower shear strength. Temperature has a great influence on the microstructure and mechanical properties of the diffusion bonding joints. The diffusion region presents a black α-Ti strip area in the middle part with the width of about 10 µm at lower temperature (910°C) with poorer property, due to the grain growth of the parent metal, the property is slightly poorer when the temperature is too high (960°C), and the optimal temperature is 930°C with a higher shear strength.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Niu, T., Jiang, B., Zhang, N., & Wang, Y. (2021). Microstructure and mechanical properties of Ti-Ti 2 AlNb interface. Composites and Advanced Materials. https://doi.org/10.1177/2633366x20929713

Vancouver

Niu T, Jiang B, Zhang N, Wang Y. Microstructure and mechanical properties of Ti-Ti 2 AlNb interface. Composites and Advanced Materials. 2021. doi:10.1177/2633366x20929713

BibTeX
@article{Niu2021,
  author = {Niu, Tao and Jiang, Bo and Zhang, Ning and Wang, Yaoqi},
  title = {Microstructure and mechanical properties of Ti-Ti 2 AlNb interface},
  journal = {Composites and Advanced Materials},
  year = {2021},
  doi = {10.1177/2633366x20929713}
}
Kostenlos starten →