EUVIMEDEUVIMED entdecken
Crossref

Evolution of 3d printing technology in fabrication of microfluidic devices and biological applications: a comprehensive review

Ranamay Saha, Moloy Sarkar, Sagnik Sarma Choudhury, Hemant Kumar, Geeta Bhatt, Shantanu Bhattacharya

Journal of Micromanufacturing · 2024-05 · 7 (1) · 110-140

DOI: 10.1177/25165984241237357 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Micromanufacturing, online erschienen am 03.04.2024. Verfasst von Ranamay Saha und 5 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 142 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lab-on-a-chip or LOC is a term that is used to describe microfluidic devices that integrate multiple analyte detection, which are normally carried out in a laboratory, into one micro-chip unit and may have applications in diverse fields such as electronics, medicine and biomedical domains. Even though microfluidics has advanced greatly during the past decade due to increased needs for portability, reduced sample requirement and multiple analyte detection capabilities biological research has not adopted the technology at the required pace. This may be owing to the time-consuming and expensive process involved in the microfabrication of biochips, the requirement of specialised setup facilities and the extremely high cost associated with microfluidics as compared to conventional technologies. In recent years, three-dimensional (3D) printing has piqued curiosity in the scientific community. It has the potential to create complex, high-resolution structures and that too in a short timeframe depending upon device complexity. This could inspire progressive research in microfluidics, particularly finding applications in biomedical engineering and point-of-care diagnostics. This article gives an overview of how 3D printing aids in the manufacture of microfluidic devices for biological applications, as well as the existing 3D printing methods which are utilised for fabrication and the future perspective in the development of microfluidic devices.

Zitieren

APA

Saha, R., Sarkar, M., Choudhury, S. S., Kumar, H., Bhatt, G., & Bhattacharya, S. (2024). Evolution of 3d printing technology in fabrication of microfluidic devices and biological applications: a comprehensive review. Journal of Micromanufacturing, 7(1), 110-140. https://doi.org/10.1177/25165984241237357

Vancouver

Saha R, Sarkar M, Choudhury SS, Kumar H, Bhatt G, Bhattacharya S. Evolution of 3d printing technology in fabrication of microfluidic devices and biological applications: a comprehensive review. Journal of Micromanufacturing. 2024;7(1):110-140. doi:10.1177/25165984241237357

BibTeX
@article{Saha2024,
  author = {Saha, Ranamay and Sarkar, Moloy and Choudhury, Sagnik Sarma and Kumar, Hemant and Bhatt, Geeta and Bhattacharya, Shantanu},
  title = {Evolution of 3d printing technology in fabrication of microfluidic devices and biological applications: a comprehensive review},
  journal = {Journal of Micromanufacturing},
  year = {2024},
  volume = {7},
  number = {1},
  pages = {110--140},
  doi = {10.1177/25165984241237357}
}
Kostenlos starten →