EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

The effect of bleaching on surface roughness and gloss of different CAD/CAM ceramic and hybrid ceramic materials

Ruwaida Z Alshali iD, Mohammed A AlQahtani, Dalea M Bukhary, Mlak A Alzahrani, Shatha S Alsoraihi, Majed A Alqahtani

Journal of Applied Biomaterials & Functional Materials · 2023

DOI: 10.1177/22808000231152566 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Biomaterials & Functional Materials, 2023. Verfasst von Ruwaida Z Alshali und 5 weiteren Autor:innen. Beteiligte Einrichtung: Oral and Maxillofacial Prosthodontics Department, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia. Hauptthemen laut MEDLINE: Ceramics, Silicates. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

To assess the effect of bleaching on surface roughness and gloss of different CAD/CAM ceramic materials.

Methods

The ceramic materials included IPS e.max CAD (lithium disilicate), VITA ENAMIC (polymer infiltrated ceramic), and Celtra Duo CAD (zirconia reinforced lithium silicate). Samples of each material were randomly divided into four groups ( n = 10); a control group immersed in distilled water, the second and third groups were treated with 20% carbamide peroxide (20% CP) and 35% carbamide peroxide (35% CP) bleaching agents for 4 h/day and 60 min/day respectively for 7 days. The fourth group was treated with 40% hydrogen peroxide (40% HP) applied twice, each turn for 20 min. After treatment, the surface roughness (using 3D non-contact profilometry) and surface gloss were assessed followed by imaging with a scanning electron microscope. The data were analyzed using multiple linear regression and Kruskal-Wallis one-way ANOVA tests (α = 0.05).

Results

The surface roughness ( p = 0.157) and gloss ( p = 0.073) of IPS e.max CAD were not significantly affected by the different bleaching treatments. Similarly, no significant effect on surface roughness ( p = 0.162) and gloss ( p = 0.965) were shown for Celtra Duo CAD. On the other hand, VITA ENAMIC was significantly affected when treated with 20% CP and 35% CP showing increased roughness ( p = 0.001) and gloss ( p = 0.008).

Conclusions

Home bleaching treatments (20% CP and 35% CP) significantly affected the surface roughness and gloss of VITA ENAMIC while IPS e.max CAD and Celtra Duo CAD were not affected by the different bleaching treatments.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CeramicsSilicatesCarbamide PeroxideComputer-Aided DesignDental PorcelainMaterials TestingSurface Properties

Stichwörter der Autor:innen

CAD/CAM ceramicbleachingglosshybrid ceramicroughness

Substanzen

Carbamide PeroxideDental PorcelainSilicates

Autor:innen und Institutionen

  • Oral and Maxillofacial Prosthodontics Department, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia.
  • Prosthetic Dental Science, College of Dentistry, King Saud University, Riyadh, Saudi Arabia.
  • Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia.
  • Ministry of Health, Makkah Province, Saudi Arabia.
  • Ministry of Health, Aseer Province, Saudi Arabia.

ORCID-Profile: Ruwaida Z Alshali

Zitieren

APA

Alshali, R. Z., AlQahtani, M. A., Bukhary, D. M., Alzahrani, M. A., Alsoraihi, S. S., & Alqahtani, M. A. (2023). The effect of bleaching on surface roughness and gloss of different CAD/CAM ceramic and hybrid ceramic materials. Journal of Applied Biomaterials & Functional Materials. https://doi.org/10.1177/22808000231152566

Vancouver

Alshali RZ, AlQahtani MA, Bukhary DM, Alzahrani MA, Alsoraihi SS, Alqahtani MA. The effect of bleaching on surface roughness and gloss of different CAD/CAM ceramic and hybrid ceramic materials. Journal of Applied Biomaterials & Functional Materials. 2023. doi:10.1177/22808000231152566

BibTeX
@article{Alshali2023,
  author = {Alshali, Ruwaida Z and AlQahtani, Mohammed A and Bukhary, Dalea M and Alzahrani, Mlak A and Alsoraihi, Shatha S and Alqahtani, Majed A},
  title = {The effect of bleaching on surface roughness and gloss of different CAD/CAM ceramic and hybrid ceramic materials},
  journal = {Journal of Applied Biomaterials & Functional Materials},
  year = {2023},
  doi = {10.1177/22808000231152566}
}
Kostenlos starten →