EUVIMEDEUVIMED entdecken
Crossref

Anatomical head model to measure impact force transfer through the head layers and their displacement

Lisa Falland-Cheung, J Neil Waddell, Kai C Li, Darryl C Tong, Paul A Brunton

Journal of Concussion · 2018

DOI: 10.1177/2059700218777829 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Concussion, 2018. Verfasst von Lisa Falland-Cheung und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 24 Literaturangaben. Gefördert von: Maurice and Phyllis Paykel Trust, Neurological Foundation of New Zealand.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

When the human head is subjected to blunt force impact, there are several mechanical responses that may result from the forces involved, including absorption of impact forces through the various layers of the head. The purpose of this study was to develop an anatomical head model to measure force transfer through the various head layers and their displacement when subject to short-duration high-velocity impacts. An anatomical head model was constructed using previously validated simulant materials: epoxy resin (skull), polyvinyl siloxane (scalp), agar/glycerol/water (brain) and modified intravenous fluid for the cerebrospinal fluid. An array of accelerometers (4 mm × 4 mm × 1.45 mm) was incorporated into the various layers of the head to measure forces in x- (anterior/posterior), y- (left/right) and z- (up/down) axis. All sensors were connected to a signal conditioning board and USB powered data loggers. The head model was placed into a rigid metal stand with an optical sensor to trigger data capturing. A weight (750 g) was dropped from a height of 0.5 m (n= 20). Impact forces (z-axis) of 1107.05 N were recorded on top of the skin, with decreasing values through the different layers (bottom of skin 78.48 N, top of skull 319.82 N, bottom of skull 87.30 N, top and centre of brain 47.09 N and base of brain 78.41 N. Forces in the x- and y-axes were similar to those of the z-axis. With the base of the brain still receiving 78.41 N, this highlights the potential danger of repetitive impact forces to the head. Upon impact the layers of the head are displaced in the x-, y- and z-direction, with the highest values shown in the z-axis. In conclusion, this study identified the importance of considering short-duration high-intensity impacts to the head and their effect on underlying tissues.

Förderung

  • Maurice and Phyllis Paykel Trust
  • Neurological Foundation of New Zealand

Zitieren

APA

Falland-Cheung, L., Waddell, J. N., Li, K. C., Tong, D. C., & Brunton, P. A. (2018). Anatomical head model to measure impact force transfer through the head layers and their displacement. Journal of Concussion. https://doi.org/10.1177/2059700218777829

Vancouver

Falland-Cheung L, Waddell JN, Li KC, Tong DC, Brunton PA. Anatomical head model to measure impact force transfer through the head layers and their displacement. Journal of Concussion. 2018. doi:10.1177/2059700218777829

BibTeX
@article{FallandCheung2018,
  author = {Falland-Cheung, Lisa and Waddell, J Neil and Li, Kai C and Tong, Darryl C and Brunton, Paul A},
  title = {Anatomical head model to measure impact force transfer through the head layers and their displacement},
  journal = {Journal of Concussion},
  year = {2018},
  doi = {10.1177/2059700218777829}
}
Kostenlos starten →