Inertial and frictional influences of instrumented wheelchair wheels
Journal of Rehabilitation and Assistive Technologies Engineering · 2016
DOI: 10.1177/2055668316649892 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Rehabilitation and Assistive Technologies Engineering, 2016. Verfasst von Stephen Sprigle und 2 weiteren Autor:innen. Beteiligte Einrichtung: Rehabilitation Engineering and Applied Research Lab, Georgia Institute of Technology, Atlanta, USA. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 13 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.
Abstract (Originalsprache)
Background
Instrumented wheelchair wheels can be used to study the kinematics and kinetics of manual wheelchair propulsion. The objective of this study was to evaluate the impact of instrumented wheels on the inertial and frictional parameters of a wheelchair system.
Methods
This study compared mechanical parameters of an ultralightweight rigid frame wheelchair configured with pairs of SMARTwheels and spoke pneumatic wheels and loaded with an ISO 75 kg wheelchair dummy. Rectilinear and turning inertia of the occupied wheelchair and the rotational inertia of drive wheels were measured. A coast-down test measured frictional energy loss during straight and turning trajectories.
Findings
The addition of instrumented wheels increased occupied system mass by about 6% and turning inertia by about 16%. Frictional energy loss increased by over 40% in a straight trajectory and over 30% during turning.
Interpretation
Addition of instrumented increased the inertia and frictional energy loss of the wheelchair system. These relative effects will impact the wheelchair operator and increase the instantaneous propulsion torque during wheelchair maneuvers. The impacts will be less under conditions involving little or no change in velocity. Researchers should be encouraged to report changes in mass and weight distribution induced by addition of instrumented wheelchair wheels.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Rehabilitation Engineering and Applied Research Lab, Georgia Institute of Technology, Atlanta, USA.
Zitieren
APA
Sprigle, S., Huang, M., & Lin, J. T. (2016). Inertial and frictional influences of instrumented wheelchair wheels. Journal of Rehabilitation and Assistive Technologies Engineering. https://doi.org/10.1177/2055668316649892
Vancouver
Sprigle S, Huang M, Lin JT. Inertial and frictional influences of instrumented wheelchair wheels. Journal of Rehabilitation and Assistive Technologies Engineering. 2016. doi:10.1177/2055668316649892
BibTeX
@article{Sprigle2016,
author = {Sprigle, Stephen and Huang, Morris and Lin, Jui-Te},
title = {Inertial and frictional influences of instrumented wheelchair wheels},
journal = {Journal of Rehabilitation and Assistive Technologies Engineering},
year = {2016},
doi = {10.1177/2055668316649892}
}
EUVIMED