EUVIMEDEUVIMED entdecken
Crossref

A lower bound solution for final plastic deformation of rectangular plates under localised impulsive loading

Weizheng Xu, Yu Huang, Zhiguo Yu, Tong Li, Hao Tang, Yexun Li, Hua Fu, Xianxu Zheng

International Journal of Protective Structures · 09.04.2026

DOI: 10.1177/20414196261440955 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Protective Structures, online erschienen am 09.04.2026. Verfasst von Weizheng Xu und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: the National Natural Science Foundation of China, Institute of Fluid Physics High Quality Development Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A general approach for constructing a lower bound solution to predict the final plastic deformation of rectangular plates under localized impulsive loading has been developed. This approach employs the modal approximation technique to calculate the initial modal velocity. The average strain rate effect is determined by estimating the maximum strain rate field within the rectangular plate when half of the initial modal kinetic energy has been dissipated. A formula for calculating the final plastic deformation, considering strain rate effects, is derived based on the principle of energy conservation, given a specific deformation profile. To validate the proposed model, the cosine deformation profile, which serves as the exact solution of the field equation, is initially selected. The calculated results of the analytical solution, both with and without strain rate effects, are compared against experimental data to assess the model’s reliability. Subsequently, the effects of two commonly used parabolic and Bessel deformation profiles are analyzed in terms of their influence on the calculated final plastic deformation and average variations. Building on the simplified mode solutions, three new dimensionless numbers are introduced. Using experimental data from square and rectangular plates, four effective linear fitting formulas are established to predict the dimensionless final plastic deformation based on these new dimensionless numbers. Furthermore, the new dimensionless numbers are compared with Jacob’s dimensionless number under various loading scenarios, demonstrating that the dimensionless numbers proposed are more reasonable despite introducing an added level of complexity. The limitations of Jacob’s dimensionless number are identified, and its applicable range is suggested.

Förderung

  • the National Natural Science Foundation of China
  • Institute of Fluid Physics High Quality Development Fund

Zitieren

APA

Xu, W., Huang, Y., Yu, Z., Li, T., Tang, H., Li, Y., Fu, H., & Zheng, X. (2026). A lower bound solution for final plastic deformation of rectangular plates under localised impulsive loading. International Journal of Protective Structures. https://doi.org/10.1177/20414196261440955

Vancouver

Xu W, Huang Y, Yu Z, Li T, Tang H, Li Y, et al. A lower bound solution for final plastic deformation of rectangular plates under localised impulsive loading. International Journal of Protective Structures. 2026. doi:10.1177/20414196261440955

BibTeX
@article{Xu2026,
  author = {Xu, Weizheng and Huang, Yu and Yu, Zhiguo and Li, Tong and Tang, Hao and Li, Yexun and Fu, Hua and Zheng, Xianxu},
  title = {A lower bound solution for final plastic deformation of rectangular plates under localised impulsive loading},
  journal = {International Journal of Protective Structures},
  year = {2026},
  doi = {10.1177/20414196261440955}
}
Kostenlos starten →