Design and Fabrication of Demountable 3D Microphysiological Systems
Tissue Engineering Part C: Methods · 01.06.2026 · 32 (6) · 230-239
DOI: 10.1177/19373384261457992 ↗Kurz gefasst
Fachartikel in der Zeitschrift Tissue Engineering Part C: Methods, online erschienen am 12.06.2026. Verfasst von Selina Banerjee und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Northeastern University, Boston, Massachusetts, USA. Hauptthemen laut MEDLINE: Microphysiological Systems, Cell Culture Techniques, Three Dimensional. Die Arbeit nennt 53 Literaturangaben. Gefördert von: NIGMS NIH HHS, National Institutes of Health, National Aeronautics and Space Administration.
Abstract (Originalsprache)
Several recent advances in microphysiological systems or organ-on-chip technology have demonstrated its potential for replacing traditional in vitro and animal models in the coming years. Despite the physiological relevance and cost-effectiveness of organ chips, there are several hurdles that must be overcome for widespread adoption for biological studies. Many manufacturing and scalability challenges have been overcome by a transition from polydimethylsiloxane to thermoplastics. However, challenges have arisen in these sealed, brittle systems related to end-point tissue analyses, harvest, and high-resolution imaging, which is particularly difficult for multilayer organ chips. Here, we present low-cost organ chips that are fluidically sealed but demountable, fabricated using a cut-and-assemble method without the need for cleanroom technologies. We have validated the capabilities of this method by demonstrating the culture of human aortic smooth muscle cells and induced pluripotent stem cell-derived neural cells, encapsulated in gelatin methacryloyl (GelMA) hydrogel on chip, for up to 27 days. The three-dimensional (3D) culture layer of the organ chip was removed, and high-resolution images were obtained following immunostaining. Furthermore, these organ chips facilitate rapid redesign and manufacture for alternative tissue and/or interface systems. To the best of our knowledge, this is the first innervated organ chip with multiple removable cell culture layers, as well as the first humanized nerve–artery model that includes a 3D hydrogel culture. In future work, these unique features of our platform can be utilized for investigating the crosstalk mechanisms between different cell types in coculture. Impact Statement We present here a new method for fabricating low-cost demountable organ-on-a-chip platforms. This method leverages our recent cut-and-assemble method for layered three-dimensional organ chips comprised of gas impermeable thermoplastics.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, Northeastern University, Boston, Massachusetts, USA.
- Department of Bioengineering, Northeastern University, Boston, Massachusetts, USA.
- Department of Biology, Northeastern University, Boston, Massachusetts, USA.
ORCID-Profile: Ryan Koppes
Förderung
- NIGMS NIH HHS
- National Institutes of Health
- National Aeronautics and Space Administration
Zitieren
APA
Banerjee, S., Brady, R., Abu-Absi, L., Miller, D., Schellberg, B., Dai, G., Koppes, A., & Koppes, R. (2026). Design and Fabrication of Demountable 3D Microphysiological Systems. Tissue Engineering Part C: Methods, 32(6), 230-239. https://doi.org/10.1177/19373384261457992
Vancouver
Banerjee S, Brady R, Abu-Absi L, Miller D, Schellberg B, Dai G, et al. Design and Fabrication of Demountable 3D Microphysiological Systems. Tissue Engineering Part C: Methods. 2026;32(6):230-239. doi:10.1177/19373384261457992
BibTeX
@article{Banerjee2026,
author = {Banerjee, Selina and Brady, Ryan and Abu-Absi, Lina and Miller, Dylan and Schellberg, Bryan and Dai, Guohao and Koppes, Abigail and Koppes, Ryan},
title = {Design and Fabrication of Demountable 3D Microphysiological Systems},
journal = {Tissue Engineering Part C: Methods},
year = {2026},
volume = {32},
number = {6},
pages = {230--239},
doi = {10.1177/19373384261457992}
}
EUVIMED