A template/electrochemical deposition method for fabricating silver nanorod arrays based on porous anodic alumina
Nanomaterials and Nanotechnology · 01.01.2017 · 7 · 184798041771754
DOI: 10.1177/1847980417717543 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials and Nanotechnology, online erschienen am 05.07.2017. Verfasst von Yafang Li und 7 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
A template/electrochemical deposition method for fabricating silver nanorod arrays based on porous anodic alumina was presented. The barrier layer of porous anodic alumina templates was thinned by step-by-step voltage decrement method. Subsequently, silver ions were reduced into the channels of porous anodic alumina templates by electrochemical deposition method. Electrochemical impedance spectroscopy was utilized for analyzing the thickness of barrier layer of porous anodic alumina templates; the elementary composition and the size of silver nanorod arrays were characterized by X-ray diffraction and field-emission scanning electron microscope, respectively. Experimental results showed that the thickness of barrier layer of porous anodic alumina was suitable for alternating current electrochemical deposition, when anodizing potential was decreased to 70 V and widening time of porous anodic alumina in H 3 PO 4 solution is 80 min. And the silver particles could be deposited into the channels of porous anodic alumina templates at 11 V, 13 V, and 15 V. Different sizes of silver nanorod arrays were obtained by controlling the deposition time. The average diameter of silver nanorod is in the range from 346 nm to 351 nm which is almost consistent with the pore diameter of porous anodic alumina templates (367 nm). The uniform silver nanorod arrays have a considerable potential in the flexible and wearable electronic devices, optics, solar cell, the catalytical electrode, and so on.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Li, Y., Xu, J., Liu, H., Song, J., Li, Y., Cheng, B., Li, J., & Li, X. (2017). A template/electrochemical deposition method for fabricating silver nanorod arrays based on porous anodic alumina. Nanomaterials and Nanotechnology, 7, 184798041771754. https://doi.org/10.1177/1847980417717543
Vancouver
Li Y, Xu J, Liu H, Song J, Li Y, Cheng B, et al. A template/electrochemical deposition method for fabricating silver nanorod arrays based on porous anodic alumina. Nanomaterials and Nanotechnology. 2017;7:184798041771754. doi:10.1177/1847980417717543
BibTeX
@article{Li2017,
author = {Li, Yafang and Xu, Jie and Liu, Hao and Song, Jinzhong and Li, Yashuang and Cheng, Bowen and Li, Jin and Li, Xiaojiu},
title = {A template/electrochemical deposition method for fabricating silver nanorod arrays based on porous anodic alumina},
journal = {Nanomaterials and Nanotechnology},
year = {2017},
volume = {7},
pages = {184798041771754},
doi = {10.1177/1847980417717543}
}
EUVIMED