EUVIMEDEUVIMED entdecken
StudienprotokollOpen Access · CC BY 4.0

Study protocol for a pilot randomized crossover trial: Comparing the clinical utility, feasibility, and patient outcomes of remote 3D-printed orthosis fabrication using an innovative heat-reshapable PCL

Maryam Farzad iD, Joy MacDermid iD, Louis Ferreira, Steven Cuypers

Hand Therapy · 2026-12 · 31 (4) · 310-317

DOI: 10.1177/17589983261430907 ↗

Kurz gefasst

Studienprotokoll in der Zeitschrift Hand Therapy, online erschienen am 19.03.2026. Verfasst von Maryam Farzad und 3 weiteren Autor:innen. Beteiligte Einrichtung: Hand and Upper Limb Center, St. Joseph's Health Center, London, ON, Canada. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Mitacs.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Introduction

Orthotic fabrication is a widely used option of the conservative management of carpometacarpal (CMC) osteoarthritis, where conventional low-temperature thermoplastic orthosis requires in-person expertise and adjustments, which limit access to care. Advances in 3D printing and smartphone-based scanning offer opportunities for remote orthosis fabrication. However, the feasibility, accuracy, and patient outcomes compared with traditional methods remain unclear.

Methods

This randomized crossover pilot trial will compare remote 3D-printed orthoses, fabricated using a novel heat re-shapable polycaprolactone (PCL), with conventionally fabricated thermoplastic orthoses in 40 hands with early-stage CMC osteoarthritis. Each participant will receive both interventions in a random order, separated by a 1-week washout period. Outcomes include pain (measured using the Numerical Rating Scale), function (assessed using the QuickDASH), adherence, satisfaction, and clinical utility (evaluated using the QUEST and qualitative interviews). Technical parameters (fabrication time, material properties, weight, and need for adjustments) and the feasibility of smartphone versus high-precision photogrammetry scanning will also be evaluated.

Results

As a pilot study, outcomes will focus on feasibility benchmarks (recruitment, retention, adherence) and variability estimates to inform sample size calculations for a definitive trial. Preliminary comparisons of pain, function, and satisfaction between orthosis types, as well as the usability of smartphone scanning and the adaptability of heat re-shapable PCL, will be reported. Discussion/Conclusion This study will provide the first clinical evidence on the feasibility and patient-centred utility of remote orthosis fabrication using an innovative heat re-shapable 3D printing material. Findings will inform whether digital workflows can extend access to hand therapy and support larger-scale trials to evaluate clinical effectiveness and long-term outcomes.

Schlagwörter

Stichwörter der Autor:innen

3D printCMC OARCTorthosis

Autor:innen und Institutionen

  • Hand and Upper Limb Center, St. Joseph's Health Center, London, ON, Canada.
  • School of Physical Therapy, Department of Health and Rehabilitation Sciences, Western University, London, ON, Canada.
  • Department of Occupational Therapy, University of Social Welfare and Rehabilitation Sciences, Tehran, Iran.
  • Physical Therapy and Surgery, Western University, London, ON, Canada.
  • Rehabilitation Science, McMaster University, Hamilton, ON, Canada.
  • Department of Mechanical and Materials Engineering/Department of Surgery, Western University, London, ON, Canada.

ORCID-Profile: Maryam Farzad, Joy MacDermid

Förderung

  • Mitacs

Zitieren

APA

Farzad, M., MacDermid, J., Ferreira, L., & Cuypers, S. (2026). Study protocol for a pilot randomized crossover trial: Comparing the clinical utility, feasibility, and patient outcomes of remote 3D-printed orthosis fabrication using an innovative heat-reshapable PCL. Hand Therapy, 31(4), 310-317. https://doi.org/10.1177/17589983261430907

Vancouver

Farzad M, MacDermid J, Ferreira L, Cuypers S. Study protocol for a pilot randomized crossover trial: Comparing the clinical utility, feasibility, and patient outcomes of remote 3D-printed orthosis fabrication using an innovative heat-reshapable PCL. Hand Therapy. 2026;31(4):310-317. doi:10.1177/17589983261430907

BibTeX
@article{Farzad2026,
  author = {Farzad, Maryam and MacDermid, Joy and Ferreira, Louis and Cuypers, Steven},
  title = {Study protocol for a pilot randomized crossover trial: Comparing the clinical utility, feasibility, and patient outcomes of remote 3D-printed orthosis fabrication using an innovative heat-reshapable PCL},
  journal = {Hand Therapy},
  year = {2026},
  volume = {31},
  number = {4},
  pages = {310--317},
  doi = {10.1177/17589983261430907}
}
Kostenlos starten →