Effect of backward moving pressure wave on tulip flame formation in premixed hydrogen–air mixture
International Journal of Spray and Combustion Dynamics · 28.10.2026
DOI: 10.1177/17568277261500389 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Spray and Combustion Dynamics, online erschienen am 28.10.2026. Verfasst von Abhishek Kumar und 1 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben.
Abstract (Originalsprache)
Flame propagation and tulip flame formation in a premixed hydrogen–air mixture was investigated in a rectangular channel (400 mm length, 40 × 40 mm 2 cross-section). High-speed imaging was used to capture the temporal evolution of the flame over an equivalence ratio range from ϕ = 0.6 to 1.47, with an increment of 0.1. Flame contours extracted from images were used to determine flame position, propagation velocity, and structural transitions, including tulip-flame formation. Time-resolved shadowgraph imaging reveals that a strong upstream-propagating pressure wave interacts with the downstream-moving flame front, causing flame deceleration, local flow reversal, and eventual inversion. This interaction is evident from the pressure gradient appearing within the burnt gases in the shadowgraphs. A detailed instability analysis was performed by evaluating characteristic time scales associated with pressure-wave ( τ PW ), rarefaction-wave ( τ RW ), Darrieus–Landau ( τ DL ), and thermo-diffusive ( τ TD ) instabilities, along with the Rayleigh–Taylor (RT) instability growth factor ( σ RT *Δ t ). Although τ RW is the shortest, its influence is limited due to low wave amplitude. The pressure wave, characterised by a short τ PW , dominates flame flattening and inversion, while RT instability governs post-inversion distortion. In contrast, τ DL and τ TD remain comparatively large, indicating a minor role during rapid transitions. The combined analysis explains the strong dependence of tulip flame formation on equivalence ratio. At rich conditions ( ϕ = 1.47), multiple inversions occur with peak flame speeds of ∼169 m/s near the wall and ∼137 m/s at the centreline (Mach no. ≈ 0.39 and 0.31), and σ RT *Δ t > 1. As ϕ decreases, flame speeds and RT amplification reduce significantly, resulting in weaker or no tulip formation for ϕ ≤ 1.3.
Zitieren
APA
Kumar, A., & Joarder, R. (2026). Effect of backward moving pressure wave on tulip flame formation in premixed hydrogen–air mixture. International Journal of Spray and Combustion Dynamics. https://doi.org/10.1177/17568277261500389
Vancouver
Kumar A, Joarder R. Effect of backward moving pressure wave on tulip flame formation in premixed hydrogen–air mixture. International Journal of Spray and Combustion Dynamics. 2026. doi:10.1177/17568277261500389
BibTeX
@article{Kumar2026,
author = {Kumar, Abhishek and Joarder, Ratan},
title = {Effect of backward moving pressure wave on tulip flame formation in premixed hydrogen–air mixture},
journal = {International Journal of Spray and Combustion Dynamics},
year = {2026},
doi = {10.1177/17568277261500389}
}
EUVIMED