EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

High-frequency combustion instability mechanism of a liquid oxygen/methane swirl coaxial injector in an optically accessible chamber

Alexander Bee, Michael Börner, Jan Martin, Wolfgang Armbruster, Bernhard Knapp, Stephan General, Dogan Kaya, Justin S Hardi

International Journal of Spray and Combustion Dynamics · 07.07.2026

DOI: 10.1177/17568277261465762 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Spray and Combustion Dynamics, online erschienen am 07.07.2026. Verfasst von Alexander Bee und 7 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Injector elements are an elemental sub-component of any liquid rocket engine, as they are critical in influencing engine efficiency and combustion stability. Therefore, characterizing such elements is of great importance. In regeneratively cooled rocket engines, significant changes in fuel injection temperature can occur between load points or during the development phase. The impact of such changes on combustion dynamics, however, is not fully understood, especially for swirl injectors. Therefore, this study presents results from a single swirl coaxial injector element hot-fire test campaign where fuel injection temperature is varied between 175 K and 240 K. The injector element injects liquid oxygen and natural gas into an optically accessible combustion chamber at pressures between 35 and 80 bar. It is observed that under high-pressure, low-fuel-temperature conditions, high-frequency chamber modes with frequencies above 15 kHz are increasingly excited. Additionally, high-amplitude oscillations occur for these modes, with peak-to-peak oscillations approaching 20% of chamber pressure. Analysis concludes that, for low fuel injection momentum scenarios, the liquid oxygen injectors couple with the first radial combustion chamber mode, while an additional coupling effect with the fuel injector leads to these high-amplitude instabilities. Combined with the outward flame pulsation observed in the optical data, a mechanism explaining the flame-acoustic interaction for a swirl coaxial injector is proposed. The article concludes by defining stability boundaries for common injection parameters, including velocity and momentum flux ratio.

Zitieren

APA

Bee, A., Börner, M., Martin, J., Armbruster, W., Knapp, B., General, S., Kaya, D., & Hardi, J. S. (2026). High-frequency combustion instability mechanism of a liquid oxygen/methane swirl coaxial injector in an optically accessible chamber. International Journal of Spray and Combustion Dynamics. https://doi.org/10.1177/17568277261465762

Vancouver

Bee A, Börner M, Martin J, Armbruster W, Knapp B, General S, et al. High-frequency combustion instability mechanism of a liquid oxygen/methane swirl coaxial injector in an optically accessible chamber. International Journal of Spray and Combustion Dynamics. 2026. doi:10.1177/17568277261465762

BibTeX
@article{Bee2026,
  author = {Bee, Alexander and Börner, Michael and Martin, Jan and Armbruster, Wolfgang and Knapp, Bernhard and General, Stephan and Kaya, Dogan and Hardi, Justin S},
  title = {High-frequency combustion instability mechanism of a liquid oxygen/methane swirl coaxial injector in an optically accessible chamber},
  journal = {International Journal of Spray and Combustion Dynamics},
  year = {2026},
  doi = {10.1177/17568277261465762}
}
Kostenlos starten →