EUVIMEDEUVIMED entdecken
Crossref

Thermoacoustic finite element method modeling of partly autoignition and propagation-stabilized flames

Simon M Heinzmann, Nino A Leder, Harish S Gopalakrishnan, Mirko R Bothien

International Journal of Spray and Combustion Dynamics · 28.05.2026

DOI: 10.1177/17568277261454109 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Spray and Combustion Dynamics, online erschienen am 28.05.2026. Verfasst von Simon M Heinzmann und 3 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Gefördert von: Swiss Federal Department of Economic Affairs, Education and Research, State Secretariat for Education, Research and Innovation, Hydrogen Europe, Clean Hydrogen Partnership.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper describes a methodology to thermoacoustically account for different flame types in a single Finite-Element-computation. To do so, the flame segmentation mechanism presented in previous studies is used to characterize the different flame zones. Differentiation is done between propagation-stabilized shear-layer flames and autoignition flames that respond to acoustic perturbations very differently. While autoignition flames mainly respond to acoustic pressure and temperature fluctuations, propagation-stabilized flames respond to acoustic velocity perturbations. Thus, flame transfer functions specific to each flame type are analytically implemented within the frequency domain Finite-Element-computation. Using the novel framework, it is shown that the global flame transfer function obtained from Computational Fluid Dynamics (CFD) simulations of a backward facing step reheat combustor can be reproduced accurately in the low-frequency regime for an operating point where the flame is forced in a planar manner. The investigated operating point operates on hydrogen fully premixed at lean and autoignitive conditions. The autoignition framework is validated by comparison to one-dimensional direct numerical simulation. The time-averaged CFD heat release rate result is validated with large eddy simulation data.

Förderung

  • Swiss Federal Department of Economic Affairs, Education and Research, State Secretariat for Education, Research and Innovation
  • Hydrogen Europe
  • Clean Hydrogen Partnership
  • Hydrogen Europe Research

Zitieren

APA

Heinzmann, S. M., Leder, N. A., Gopalakrishnan, H. S., & Bothien, M. R. (2026). Thermoacoustic finite element method modeling of partly autoignition and propagation-stabilized flames. International Journal of Spray and Combustion Dynamics. https://doi.org/10.1177/17568277261454109

Vancouver

Heinzmann SM, Leder NA, Gopalakrishnan HS, Bothien MR. Thermoacoustic finite element method modeling of partly autoignition and propagation-stabilized flames. International Journal of Spray and Combustion Dynamics. 2026. doi:10.1177/17568277261454109

BibTeX
@article{Heinzmann2026,
  author = {Heinzmann, Simon M and Leder, Nino A and Gopalakrishnan, Harish S and Bothien, Mirko R},
  title = {Thermoacoustic finite element method modeling of partly autoignition and propagation-stabilized flames},
  journal = {International Journal of Spray and Combustion Dynamics},
  year = {2026},
  doi = {10.1177/17568277261454109}
}
Kostenlos starten →