EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Experimental study on flash-boiling spray structure of multi-hole gasoline direct injection injector in a constant volume chamber

Jian Wu, Jiakun Du, Hong Chen, Yuhuai Li, Wenfeng Zhan, Guangquan Wu, Lin Ye

International Journal of Spray and Combustion Dynamics · 2020-01 · 12

DOI: 10.1177/1756827720932431 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Spray and Combustion Dynamics, online erschienen am 10.07.2020. Verfasst von Jian Wu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Key R&D Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The macroscopic and microscopic characteristics of flash-boiling spray were experimentally investigated with various optical measurement techniques. The effects of ambient pressure and fuel temperature on flash-boiling characteristics in multi-hole gasoline direct injection injector were analyzed. The analysis was focused on the spray structure and atomization droplet size distributions. In order to increase the understanding of the flash-boiling spray targeting, three injectors with different spray patterns were investigated under strong flash-boiling condition. The results show that ambient pressure and fuel temperature have significant influence on flash boiling. Both lower ambient pressure and higher fuel temperature could accelerate the flash-boiling process. For the macroscopic characteristics, similar influences could be found with the ambient pressure decreased by 0.4 bar and the fuel temperature increased by 10°C. Further, significant difference could be found within cold-jet spray and strong flash-boiling spray, such as the spatial structure. The spray structure always turns from hollow cone into solid when flash boiling occurs. With a higher fuel superheat degree, the spray droplet distribution moves toward smaller sizes and let the larger droplets reduce due to the promotion of atomization. For the strong flash-boiling spray, the Sauter mean diameter has decreased by 50% compared with cold-jet spray. There is a corresponding relationship between collapsed flash-boiling spray target and weighted geometric center of the injector. Spray collapse could be avoided by increasing the plume distance.

Förderung

  • National Key R&D Program of China

Zitieren

APA

Wu, J., Du, J., Chen, H., Li, Y., Zhan, W., Wu, G., & Ye, L. (2020). Experimental study on flash-boiling spray structure of multi-hole gasoline direct injection injector in a constant volume chamber. International Journal of Spray and Combustion Dynamics, 12. https://doi.org/10.1177/1756827720932431

Vancouver

Wu J, Du J, Chen H, Li Y, Zhan W, Wu G, et al. Experimental study on flash-boiling spray structure of multi-hole gasoline direct injection injector in a constant volume chamber. International Journal of Spray and Combustion Dynamics. 2020;12. doi:10.1177/1756827720932431

BibTeX
@article{Wu2020,
  author = {Wu, Jian and Du, Jiakun and Chen, Hong and Li, Yuhuai and Zhan, Wenfeng and Wu, Guangquan and Ye, Lin},
  title = {Experimental study on flash-boiling spray structure of multi-hole gasoline direct injection injector in a constant volume chamber},
  journal = {International Journal of Spray and Combustion Dynamics},
  year = {2020},
  volume = {12},
  doi = {10.1177/1756827720932431}
}
Kostenlos starten →