Machining performance analysis of micro-abrasive peened tungsten carbide inserts using multi-objective optimisation
Tribology - Materials, Surfaces & Interfaces · 11.11.2026
DOI: 10.1177/17515831261505116 ↗Kurz gefasst
Fachartikel in der Zeitschrift Tribology - Materials, Surfaces & Interfaces, online erschienen am 11.11.2026. Verfasst von Vishal V und 4 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Gefördert von: Chief Minister’s Research Grant (CMRG), DoTE, Rashtriya Uchchatar Shiksha Abhiyan, CSIR.
Abstract (Originalsprache)
This study developed a micro-abrasive peening setup to enhance the hardness and wear resistance of tungsten carbide inserts using alumina (Al 2 O 3 ) powder. Micro-abrasive peening experiments were conducted at three pressures (4, 6, and 8 bar) and three durations (60, 120, and 180 s). Results showed a hardness increase of ∼21% at 8 bar for 120 s. Surface roughness of the inserts increased by 150–350% with higher pressure and duration. Flank wear decreased by up to 16% under the 4 bar, 60 s condition, while severe cutting-edge damage under the 6 bar, 120 s condition is observed. Workpiece surface roughness improved by up to 17% using the insert treated at 8 bar for 120 s. Crater wear decreased by ∼11% and ∼17% under the 8 bar, 120 s and 180 s conditions, respectively. Finally, TOPSIS-based multi-objective optimisation identified the 8 bar, 120 s condition as the optimal combination of treatment parameters for improved machining performance.
Förderung
- Chief Minister’s Research Grant (CMRG), DoTE
- Rashtriya Uchchatar Shiksha Abhiyan
- CSIR
Zitieren
APA
V, V., V, V., R, S., S, J. S., & D, S. R. (2026). Machining performance analysis of micro-abrasive peened tungsten carbide inserts using multi-objective optimisation. Tribology - Materials, Surfaces & Interfaces. https://doi.org/10.1177/17515831261505116
Vancouver
V V, V V, R S, S JS, D SR. Machining performance analysis of micro-abrasive peened tungsten carbide inserts using multi-objective optimisation. Tribology - Materials, Surfaces & Interfaces. 2026. doi:10.1177/17515831261505116
BibTeX
@article{V2026,
author = {V, Vishal and V, Veeramani and R, Sarathraja and S, Joyson Selvakumar and D, Samuel Raj},
title = {Machining performance analysis of micro-abrasive peened tungsten carbide inserts using multi-objective optimisation},
journal = {Tribology - Materials, Surfaces & Interfaces},
year = {2026},
doi = {10.1177/17515831261505116}
}
EUVIMED