Avocado oil-based GNPs/TiO 2 hybrid nanocutting fluid for sustainable machining of AISI 1045 steel under MQL-CNC milling
Tribology - Materials, Surfaces & Interfaces · 29.10.2026
DOI: 10.1177/17515831261501903 ↗Kurz gefasst
Fachartikel in der Zeitschrift Tribology - Materials, Surfaces & Interfaces, online erschienen am 29.10.2026. Verfasst von Ardiansyah Alif Fachrizal Ilmy und 4 weiteren Autor:innen. Die Arbeit nennt 76 Literaturangaben. Gefördert von: Universitas Negeri Malang.
Abstract (Originalsprache)
This study investigates the thermophysical, rheological, and tribological performance of avocado oil-based nanocutting fluids containing hybrid graphene nanoplatelets (GNPs) and TiO 2 nanoparticles in minimum quantity lubrication (MQL)-assisted CNC milling of AISI 1045 steel. The nanoparticles were dispersed at 0.1, 0.15, and 0.2 wt% by magnetic stirring and ultrasonication. Nanoparticle addition increased the viscosity but raised the thermal conductivity by at most 1.9%, and all fluids retained Newtonian behavior within the investigated shear rate range; the machining improvements were therefore attributed mainly to enhanced lubrication rather than heat conduction. The 0.15 wt% formulation performed best, with the lowest mean cutting temperature (43.7°C), flank wear (VBmax = 0.405 mm), and surface roughness (Ra = 1.24 µm). Under the investigated conditions, the GNPs/TiO 2 nanocutting fluid significantly reduced the cutting temperature and flank wear relative to dry cutting and a commercial coolant, supporting its potential as a sustainable MQL lubricant.
Förderung
- Universitas Negeri Malang
Zitieren
APA
Ilmy, A. A. F., Puspitasari, P., Pramono, D. D., Muhammad, A., & Akhtar, M. N. (2026). Avocado oil-based GNPs/TiO 2 hybrid nanocutting fluid for sustainable machining of AISI 1045 steel under MQL-CNC milling. Tribology - Materials, Surfaces & Interfaces. https://doi.org/10.1177/17515831261501903
Vancouver
Ilmy AAF, Puspitasari P, Pramono DD, Muhammad A, Akhtar MN. Avocado oil-based GNPs/TiO 2 hybrid nanocutting fluid for sustainable machining of AISI 1045 steel under MQL-CNC milling. Tribology - Materials, Surfaces & Interfaces. 2026. doi:10.1177/17515831261501903
BibTeX
@article{Ilmy2026,
author = {Ilmy, Ardiansyah Alif Fachrizal and Puspitasari, Poppy and Pramono, Diki Dwi and Muhammad, Alief and Akhtar, Majid Niaz},
title = {Avocado oil-based GNPs/TiO 2 hybrid nanocutting fluid for sustainable machining of AISI 1045 steel under MQL-CNC milling},
journal = {Tribology - Materials, Surfaces & Interfaces},
year = {2026},
doi = {10.1177/17515831261501903}
}
EUVIMED