Photocatalytic conversion of CO 2 to ethanol using a fulvic acid-based nickel complex catalyst: Design, scale-up, and kinetic modelling of the RK-X photoreactor
Journal of Chemical Research · 2026-09 · 50 (5)
DOI: 10.1177/17475198261498643 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Chemical Research, online erschienen am 18.10.2026. Verfasst von Zoltán Köntös und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Photocatalytic reduction of CO 2 to ethanol using renewable light energy offers a promising route toward carbon-negative fuel production. This study reports the synthesis, characterization, and catalytic evaluation of VMMM, a fulvic acid-based nickel complex as a homogeneous photocatalyst for CO 2 -to-ethanol conversion in the RK-X reactor system. The catalyst was characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and UV-Vis spectrophotometry, revealing a stable Ni–fulvic acid coordination compound with significant light absorption at 280 nm, consistent with ligand-to-metal charge transfer (LMCT) transitions. Proof-of-concept was established at laboratory scale, where a sealed aqueous CO 2 system containing 2.00 g/L VMMM under six months of natural sunlight exposure yielded 25.0 ± 3.5 mg/L ethanol. The process was subsequently scaled to a 1,600 L continuous stirred tank reactor (CSTR) operating at 8 bar CO 2 and broad-spectrum LED illumination (219.3 W/m 2 , 3.3 kW electrical input), achieving an independently accredited ethanol concentration of 12.0 ± 1.7 mg/L within 2 hours, with exclusive carbon selectivity to ethanol confirmed by HPLC. Control experiments conducted in the absence of either light or catalyst confirmed that both components are indispensable for product formation. No by-products such as methanol, formic acid, or acetic acid were detected above the analytical limit of detection. A first-order saturation kinetic model, fitted to an eleven-point time-course dataset from two independent runs, described ethanol accumulation with an asymptotic concentration of 18.1 ± 1.8 mg/L and a characteristic time constant of 1.67 ± 0.31 h (R 2 = 0.976). Green chemistry benchmarking demonstrated a 32% atom economy, an E-factor of 2.08 kg waste kg −1 product, and a water consumption of 1.17 kg kg −1 ethanol, competitive with conventional bioethanol routes. These results establish the RK-X/VMMM system as a scalable, mechanistically coherent platform for photocatalytic CO 2 utilisation, and identify catalyst longevity under continuous illumination and full carbon balance verification as priority targets for future work.
Zitieren
APA
Köntös, Z., & Masason, M. L. (2026). Photocatalytic conversion of CO 2 to ethanol using a fulvic acid-based nickel complex catalyst: Design, scale-up, and kinetic modelling of the RK-X photoreactor. Journal of Chemical Research, 50(5). https://doi.org/10.1177/17475198261498643
Vancouver
Köntös Z, Masason ML. Photocatalytic conversion of CO 2 to ethanol using a fulvic acid-based nickel complex catalyst: Design, scale-up, and kinetic modelling of the RK-X photoreactor. Journal of Chemical Research. 2026;50(5). doi:10.1177/17475198261498643
BibTeX
@article{Knts2026,
author = {Köntös, Zoltán and Masason, Márton László},
title = {Photocatalytic conversion of CO 2 to ethanol using a fulvic acid-based nickel complex catalyst: Design, scale-up, and kinetic modelling of the RK-X photoreactor},
journal = {Journal of Chemical Research},
year = {2026},
volume = {50},
number = {5},
doi = {10.1177/17475198261498643}
}
EUVIMED