Comparative performance and environmental evaluation of 222 and 254 nm UV lamps for in-duct air disinfection in building systems
Journal of Building Physics · 2026-05 · 49 (6) · 852-874
DOI: 10.1177/17442591251382166 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Building Physics, online erschienen am 13.11.2025. Verfasst von Jay Patel und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of Alberta, Edmonton, Canada. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.
Abstract (Originalsprache)
UV germicidal irradiance has gained significant popularity as a disinfection technology since the COVID-19 pandemic. Challenges remain in accurately characterizing the in-duct irradiance distribution of UVC lamps under varying air parameters, introducing uncertainty in exposure and efficiency estimations. This study experimentally characterizes irradiance of 222 and 254 nm UV lamps in a conduit using a 9-point average method. Irradiance measurements are recorded from five sides at each point, and a correction factor is proposed to account for spectrometer detection angle overlaps. Results indicate that the 254 nm lamp output increases by 18% with an air temperature rise from 25°C to 35°C but decreases by 21% as air velocity rises from 0.5 to 2 m/s. In contrast, the 222 nm lamp shows negligible sensitivity to changes in air temperature or velocity. Relative humidity variations (25%–60%) did not significantly affect either lamp’s output. In addition, the 222 nm lamp generates minimal ozone and total volatile organic compounds (TVOCs) during operation in stagnant air. The particle tracking simulation results revealed higher velocity fluctuations in proximity to the installed 222 nm lamp than the 254 nm lamp due to the larger lamp geometries. Experimental UVGI efficacy tests targeting airborne E . coli inactivation, combined with comprehensive life cycle analysis, demonstrated that the 254 nm lamp offers superior cost-effectiveness and sustainability for continuous in-duct air disinfection. These findings provide practical insights for optimizing UVC systems for air disinfection applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, University of Alberta, Edmonton, Canada.
ORCID-Profile: Jay Patel, Lexuan Zhong
Förderung
- Natural Sciences and Engineering Research Council of Canada
Zitieren
APA
Patel, J., & Zhong, L. (2026). Comparative performance and environmental evaluation of 222 and 254 nm UV lamps for in-duct air disinfection in building systems. Journal of Building Physics, 49(6), 852-874. https://doi.org/10.1177/17442591251382166
Vancouver
Patel J, Zhong L. Comparative performance and environmental evaluation of 222 and 254 nm UV lamps for in-duct air disinfection in building systems. Journal of Building Physics. 2026;49(6):852-874. doi:10.1177/17442591251382166
BibTeX
@article{Patel2026,
author = {Patel, Jay and Zhong, Lexuan},
title = {Comparative performance and environmental evaluation of 222 and 254 nm UV lamps for in-duct air disinfection in building systems},
journal = {Journal of Building Physics},
year = {2026},
volume = {49},
number = {6},
pages = {852--874},
doi = {10.1177/17442591251382166}
}
EUVIMED