EUVIMEDEUVIMED entdecken
Crossref

High-strength, low-thermal-conductivity porous SiOC/silica aerogel composites fabricated via precursor conversion and impregnation

Jiao Yan, Mingwei Chen, Shijian Liu, Yanyuan Liang, Luyang Jiao, Haipeng Qiu

Advances in Applied Ceramics: Structural, Functional and Bioceramics · 16.11.2026

DOI: 10.1177/17436753261507817 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Applied Ceramics: Structural, Functional and Bioceramics, online erschienen am 16.11.2026. Verfasst von Jiao Yan und 5 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Gefördert von: National Defense Basic Scientific Research Program of China, Self-funded Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Porous SiOC/silica aerogel composites were successfully fabricated through a combined route of precursor conversion, sol–gel reaction-induced phase separation, and impregnation. By varying the pyrolysis temperature, the pore structure of the SiOC matrix was tailored, which directly governed its mechanical strength. The optimal pre-impregnation properties, a compressive strength of 163.65 ± 11.39 MPa and a modulus of 5.87 ± 0.12 GPa, were achieved at 1200 °C. Subsequent silica aerogel impregnation further enhanced the compressive strength by approximately 7.9% while reducing the thermal conductivity from 0.274 to 0.261 W·m −1 ·K −1 . This work demonstrates that the synthesized composite is a promising candidate for thermal insulation applications requiring high mechanical load-bearing capacity.

Förderung

  • National Defense Basic Scientific Research Program of China
  • Self-funded Project

Zitieren

APA

Yan, J., Chen, M., Liu, S., Liang, Y., Jiao, L., & Qiu, H. (2026). High-strength, low-thermal-conductivity porous SiOC/silica aerogel composites fabricated via precursor conversion and impregnation. Advances in Applied Ceramics: Structural, Functional and Bioceramics. https://doi.org/10.1177/17436753261507817

Vancouver

Yan J, Chen M, Liu S, Liang Y, Jiao L, Qiu H. High-strength, low-thermal-conductivity porous SiOC/silica aerogel composites fabricated via precursor conversion and impregnation. Advances in Applied Ceramics: Structural, Functional and Bioceramics. 2026. doi:10.1177/17436753261507817

BibTeX
@article{Yan2026,
  author = {Yan, Jiao and Chen, Mingwei and Liu, Shijian and Liang, Yanyuan and Jiao, Luyang and Qiu, Haipeng},
  title = {High-strength, low-thermal-conductivity porous SiOC/silica aerogel composites fabricated via precursor conversion and impregnation},
  journal = {Advances in Applied Ceramics: Structural, Functional and Bioceramics},
  year = {2026},
  doi = {10.1177/17436753261507817}
}
Kostenlos starten →