Multivariate non-linear regression models for the relationship between the vat photopolymerization 3D printing process of alumina ceramics and the shrinkage rate of sintered bodies
Advances in Applied Ceramics: Structural, Functional and Bioceramics · 2026-06 · 125 (3-4) · 91-106
DOI: 10.1177/17436753261450329 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Applied Ceramics: Structural, Functional and Bioceramics, online erschienen am 14.05.2026. Verfasst von Shuangyu Liu und 8 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Gefördert von: Yancheng Science and Technology Bureau, Yancheng Institute of Technology, Young Medical Key Talents Foundation of Jiangsu Province.
Abstract (Originalsprache)
This study integrates JMP-based response surface methodology with multivariate regression to optimise process parameters and predict shrinkage behaviour in vat photopolymerization-printed alumina ceramics. The analysis highlights that coating thickness is an important factor in shrinkage control, while the relative importance of linear, interaction, and quadratic contributions varies with shrinkage mode. Results showed that the shrinkage rate in the length direction was mainly associated with the linear terms of coating thickness and scraper movement speed, with an additional contribution from their interaction. The width-direction shrinkage was primarily affected by the linear term of laser power, together with the interaction between laser power and coating thickness. The inner-diameter shrinkage was mainly governed by the quadratic term of scraper speed and the interaction between laser power and scraper speed, indicating a pronounced non-linear response. The volumetric shrinkage was predominantly influenced by quadratic terms, especially those associated with coating thickness, laser power, and laser scanning speed.
Förderung
- Yancheng Science and Technology Bureau
- Yancheng Institute of Technology
- Young Medical Key Talents Foundation of Jiangsu Province
Zitieren
APA
Liu, S., Gao, J., Lu, P., Bian, D., Liang, C., Huang, C., Wang, B., Ferdinand, M., & Zhang, F. (2026). Multivariate non-linear regression models for the relationship between the vat photopolymerization 3D printing process of alumina ceramics and the shrinkage rate of sintered bodies. Advances in Applied Ceramics: Structural, Functional and Bioceramics, 125(3-4), 91-106. https://doi.org/10.1177/17436753261450329
Vancouver
Liu S, Gao J, Lu P, Bian D, Liang C, Huang C, et al. Multivariate non-linear regression models for the relationship between the vat photopolymerization 3D printing process of alumina ceramics and the shrinkage rate of sintered bodies. Advances in Applied Ceramics: Structural, Functional and Bioceramics. 2026;125(3-4):91-106. doi:10.1177/17436753261450329
BibTeX
@article{Liu2026,
author = {Liu, Shuangyu and Gao, Jun and Lu, Ping and Bian, Dong and Liang, Cong and Huang, Chuanjin and Wang, Binhuang and Ferdinand, Machibya and Zhang, Fulong},
title = {Multivariate non-linear regression models for the relationship between the vat photopolymerization 3D printing process of alumina ceramics and the shrinkage rate of sintered bodies},
journal = {Advances in Applied Ceramics: Structural, Functional and Bioceramics},
year = {2026},
volume = {125},
number = {3-4},
pages = {91--106},
doi = {10.1177/17436753261450329}
}
EUVIMED