EUVIMEDEUVIMED entdecken
Crossref

Microstructure, oxidation resistance and tribological properties of arc ion plated AlTiCN and AlTiCrN coatings at high temperature

Wu Chuanquan, Ni Guihua, Kong Dejun

Advances in Applied Ceramics: Structural, Functional and Bioceramics · 2026-06 · 125 (3-4) · 81-90

DOI: 10.1177/17436753261449899 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Applied Ceramics: Structural, Functional and Bioceramics, online erschienen am 10.05.2026. Verfasst von Wu Chuanquan und 2 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

AlTiCN and AlTiCrN coatings were deposited on Ti 6 Al 4 V alloy (TA) using an arc ion plating, and their friction behaviour at high temperature was evaluated using a wear tester, which was used to investigate the oxidation resistance and tribological performance. The results indicate that the AlTiCN coating exhibits lower roughness and higher nanohardness compared with the AlTiCrN coating. The AlTiCN coating has better oxidation resistance compared with the AlTiCrN coating, which is attributed to the amorphous C in the coating. The average coefficients of friction of AlTiCN and AlTiCrN coatings are 0.287 ± 0.02 and 0.379 ± 0.03, respectively, and the corresponding wear rates are 1.75 ± 0.2 and 7.17 ± 0.7 μm 3 ·N −1 ·mm −1 , respectively, demonstrating the superior tribological performance. The dominant wear mechanism is abrasive wear, accompanied by oxidative and fatigue wear, where the high hardness of nitrides and oxides plays a crucial role in resisting wear loss.

Zitieren

APA

Chuanquan, W., Guihua, N., & Dejun, K. (2026). Microstructure, oxidation resistance and tribological properties of arc ion plated AlTiCN and AlTiCrN coatings at high temperature. Advances in Applied Ceramics: Structural, Functional and Bioceramics, 125(3-4), 81-90. https://doi.org/10.1177/17436753261449899

Vancouver

Chuanquan W, Guihua N, Dejun K. Microstructure, oxidation resistance and tribological properties of arc ion plated AlTiCN and AlTiCrN coatings at high temperature. Advances in Applied Ceramics: Structural, Functional and Bioceramics. 2026;125(3-4):81-90. doi:10.1177/17436753261449899

BibTeX
@article{Chuanquan2026,
  author = {Chuanquan, Wu and Guihua, Ni and Dejun, Kong},
  title = {Microstructure, oxidation resistance and tribological properties of arc ion plated AlTiCN and AlTiCrN coatings at high temperature},
  journal = {Advances in Applied Ceramics: Structural, Functional and Bioceramics},
  year = {2026},
  volume = {125},
  number = {3-4},
  pages = {81--90},
  doi = {10.1177/17436753261449899}
}
Kostenlos starten →