EUVIMEDEUVIMED entdecken
VergleichsstudieOpen Access · CC BY-NC 4.0

In vitro quantification of stent-graft behaviour during chimney thoracic endovascular aortic repair

Jakub Kwiecinski iD, Raman Uberoi, Mohammed Hadi, Christopher P Cheng, Zhong You

Vascular · 2025

DOI: 10.1177/17085381241260910 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift Vascular, 2025. Verfasst von Jakub Kwiecinski und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Science, University of Oxford, Oxford, UK. Hauptthemen laut MEDLINE: Blood Vessel Prosthesis, Blood Vessel Prosthesis Implantation, Stents, Aorta, Thoracic. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

To quantify dynamic gutter phenomena and endograft deformations during double chimney thoracic endovascular aortic repair (ch-TEVAR) in a physiological model of the thoracic aorta subjected to pulsatile haemodynamic conditions.

Methods

Two in vitro procedures revascularizing the brachiocephalic trunk and left common carotid artery were performed representing both balloon-expandable (BE, Ankura-BeGraft) and self-expandable (SE, Ankura-Viabahn) double ch-TEVAR configurations. Retrospectively gated computed tomography (CT) was used to evaluate endograft behaviour. Device interactions were characterised according to gutter volume, gutter surface deviation, and endograft deformation (D-ratio) at end-diastolic and peak-systolic aortic pressure.

Results

Use of BE chimney grafts resulted in three times total gutter volume compared to SE chimney grafts. Gutter volumes were observed to vary dynamically between the end-diastolic and peak-systolic phases of the cardiac cycle, with the most substantial change associated with the BE configuration. Chimney graft deformations were dependent on device type, with SE devices exhibiting up to twice the deformation as BE devices. When adjacent, SE chimney grafts were observed to support each other, and thus tended towards a more consistently circular shape.

Conclusion

Gutter and chimney graft behaviour were dependent on device type, and exhibited both spatial and temporal variability. This study emphasises notable differences between BE and SE double ch-TEVAR configurations which should be considered when evaluating risk of endoleak. The findings reported here also support the use of gated CT to better identify device-related complications with ch-TEVAR, and can be used in the design of next generation devices.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Blood Vessel ProsthesisBlood Vessel Prosthesis ImplantationStentsAorta, ThoracicEndovascular ProceduresProsthesis DesignHumansModels, CardiovascularPulsatile FlowComputed Tomography AngiographyAortographyModels, AnatomicHemodynamicsArterial PressureEndovascular Aneurysm Repair

Stichwörter der Autor:innen

Gutterchimney graftcompressionendoleakparallel graftthoracic endovascular aortic repair

Autor:innen und Institutionen

  • Department of Engineering Science, University of Oxford, Oxford, UK.
  • Department of Radiology, John Radcliffe Hospital, Oxford University Hospitals NHS Trust, Oxford, UK.
  • Division of Vascular Surgery, Stanford University, Stanford, CA, USA.

ORCID-Profile: Jakub Kwiecinski

Zitieren

APA

Kwiecinski, J., Uberoi, R., Hadi, M., Cheng, C. P., & You, Z. (2025). In vitro quantification of stent-graft behaviour during chimney thoracic endovascular aortic repair. Vascular. https://doi.org/10.1177/17085381241260910

Vancouver

Kwiecinski J, Uberoi R, Hadi M, Cheng CP, You Z. In vitro quantification of stent-graft behaviour during chimney thoracic endovascular aortic repair. Vascular. 2025. doi:10.1177/17085381241260910

BibTeX
@article{Kwiecinski2025,
  author = {Kwiecinski, Jakub and Uberoi, Raman and Hadi, Mohammed and Cheng, Christopher P and You, Zhong},
  title = {In vitro quantification of stent-graft behaviour during chimney thoracic endovascular aortic repair},
  journal = {Vascular},
  year = {2025},
  doi = {10.1177/17085381241260910}
}
Kostenlos starten →