EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Multi-objective optimization of a full-suspension electric-assisted bicycle frame for fatigue performance and lightweight design

Yung-Chang Cheng, Cheng-Kang Lee, Cho-Pei Jiang, Li-Cheng Huang

Advances in Mechanical Engineering · 2026-11 · 18 (11)

DOI: 10.1177/16878132261503418 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Mechanical Engineering, online erschienen am 19.11.2026. Verfasst von Yung-Chang Cheng und 3 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Science and Technology Council (NSTC), Taiwan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Full-suspension electric-assisted bicycles used for off-road and mountain biking are subjected to repeated loading, making fatigue resistance and lightweight design critical requirements. This study presents a multi-objective optimization framework for a full-suspension electric-assisted bicycle frame subjected to the horizontal, vertical, and pedaling fatigue tests specified in EN 15194. Finite element analysis was performed to evaluate the fatigue safety factor and von Mises stress under the three loading conditions. Six geometric parameters of the top and down tubes were selected as design variables, while the maximum von Mises stresses and frame mass were considered optimization objectives. Uniform design of experiments and Kriging surrogate modeling were integrated with entropy weighting analysis, the Technique for Order Preference by Similarity to an Ideal Solution, and a genetic algorithm to determine the optimal design. Compared with the original frame, the optimized design reduced the maximum von Mises stresses under horizontal, vertical, and pedaling fatigue loading by 3.10%, 8.20%, and 3.08%, respectively, while reducing the frame mass by 3.73%. Sensitivity analysis further identified the relative influence of the geometric parameters on fatigue performance and frame mass.

Förderung

  • National Science and Technology Council (NSTC), Taiwan

Zitieren

APA

Cheng, Y., Lee, C., Jiang, C., & Huang, L. (2026). Multi-objective optimization of a full-suspension electric-assisted bicycle frame for fatigue performance and lightweight design. Advances in Mechanical Engineering, 18(11). https://doi.org/10.1177/16878132261503418

Vancouver

Cheng Y, Lee C, Jiang C, Huang L. Multi-objective optimization of a full-suspension electric-assisted bicycle frame for fatigue performance and lightweight design. Advances in Mechanical Engineering. 2026;18(11). doi:10.1177/16878132261503418

BibTeX
@article{Cheng2026,
  author = {Cheng, Yung-Chang and Lee, Cheng-Kang and Jiang, Cho-Pei and Huang, Li-Cheng},
  title = {Multi-objective optimization of a full-suspension electric-assisted bicycle frame for fatigue performance and lightweight design},
  journal = {Advances in Mechanical Engineering},
  year = {2026},
  volume = {18},
  number = {11},
  doi = {10.1177/16878132261503418}
}
Kostenlos starten →