Research on visual measurement method for braid density of medical braided tubes
Journal of Industrial Textiles · 2026-11 · 56
DOI: 10.1177/15280837261507424 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Industrial Textiles, online erschienen am 12.11.2026. Verfasst von Yu Liu und 5 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, Graduate Practice Innovation Program of Jiangsu University of Technology.
Abstract (Originalsprache)
To address flexible deformation, multi-layer reflection, and high-precision measurement in online geometric parameter inspection of medical braided tubes, this paper proposes a method integrating optical design and machine vision. First, images are preprocessed via grayscale conversion, median filtering, and threshold segmentation. Mesh topology is reconstructed through skeletonization and collinear contour fusion. A dual-feature adaptive DBSCAN clustering method is proposed to accurately divide skeleton points into left-slant and right-slant clusters according to geometric direction. For the separated clusters, a robust weighted least squares (WLS) method based on gradient-curvature composite weights is used for linear fitting to suppress fracture and noise interference. Finally, the fitted linear model is returned to Halcon, where an axial parallel measurement line and braiding angle geometry correction enable high-precision braid density measurement. Braid density is defined as the number of filament intersections per unit axial length, expressed in picks per inch (PPI) as per medical device industry convention, distinct from mass-per-unit-length density (tex or denier). Experimental results show that for defect-free samples, the average measurement error is 1.5%, demonstrating satisfactory repeatability and robustness for quality control. Although developed for medical braided tubes, the core algorithmic modules—dual-feature DBSCAN and WLS fitting—are generic and can be extended to other braided or woven structures with appropriate parameter tuning. The medical context is chosen due to stringent quality requirements and challenging imaging conditions (high reflectivity, fine filaments, flexible deformation), making it a representative testbed for the proposed method.
Förderung
- the National Natural Science Foundation of China
- Graduate Practice Innovation Program of Jiangsu University of Technology
Zitieren
APA
Liu, Y., Wu, Q., Zou, H., Pan, L., Wang, Z., & Liu, X. (2026). Research on visual measurement method for braid density of medical braided tubes. Journal of Industrial Textiles, 56. https://doi.org/10.1177/15280837261507424
Vancouver
Liu Y, Wu Q, Zou H, Pan L, Wang Z, Liu X. Research on visual measurement method for braid density of medical braided tubes. Journal of Industrial Textiles. 2026;56. doi:10.1177/15280837261507424
BibTeX
@article{Liu2026,
author = {Liu, Yu and Wu, Quanyu and Zou, Hufeng and Pan, Lingjiao and Wang, Zhijie and Liu, Xiaojie},
title = {Research on visual measurement method for braid density of medical braided tubes},
journal = {Journal of Industrial Textiles},
year = {2026},
volume = {56},
doi = {10.1177/15280837261507424}
}
EUVIMED