EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication and impact performance of a 3D integrally knitted composite helmet

Jiangtao Tan, Taohai Yan, Xin Li, Peixiao Zheng, Bin Xu, Aixi Xu, Bo Qin

Journal of Industrial Textiles · 2026-11 · 56

DOI: 10.1177/15280837261507401 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Industrial Textiles, online erschienen am 11.11.2026. Verfasst von Jiangtao Tan und 6 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Project Program of Key Lab for Sport Shoes Upper Materials of Fujian Province, Fujian Huafeng New Material Co.,Ltd., Research Project of Fashu Foundation, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fully fashioned knitting enables near-net-shape textile preforms for doubly curved composite shells without conventional cutting and splicing, thereby preserving reinforcement continuity and reducing assembly-induced defects. In this study, a 3D integrally knitted composite helmet shell preform was fabricated via fully fashioned knitting with a 3D weft knitted inlay structure, which was subsequently consolidated into the composite helmet using airbag-assisted consolidation. According to GB 811-2022, the impact performance of the helmet at different locations was investigated under flat-anvil and hemispherical-anvil impact conditions. The damage mechanisms of the composite helmet shell were further analyzed by combining macroscopic damage observation and micro-CT characterisation. The results reveal that the peak linear acceleration and head injury criterion at various impact sites of the helmet are substantially below the standard thresholds under the two impact loading conditions. Under flat-anvil loading, no obvious macroscopic damage was observed on the composite shell. Micro-CT characterisation only identified minor internal damage, including fiber-matrix debonding and matrix cracking, together with local crushing of the EPS liner. By contrast, hemispherical-anvil loading induced evident damage features such as shell indentation, crushing and fracture of the EPS liner. Meanwhile, multiple internal damage modes, namely fiber-matrix debonding, matrix cracking and delamination, were detected within the shell. This work demonstrates the great application potential of 3D integrally knitted composite helmets for personal protective equipment.

Förderung

  • Open Project Program of Key Lab for Sport Shoes Upper Materials of Fujian Province, Fujian Huafeng New Material Co.,Ltd.
  • Research Project of Fashu Foundation
  • National Natural Science Foundation of China
  • Talent Introduction Pre-research Project of Minjiang University

Zitieren

APA

Tan, J., Yan, T., Li, X., Zheng, P., Xu, B., Xu, A., & Qin, B. (2026). Fabrication and impact performance of a 3D integrally knitted composite helmet. Journal of Industrial Textiles, 56. https://doi.org/10.1177/15280837261507401

Vancouver

Tan J, Yan T, Li X, Zheng P, Xu B, Xu A, et al. Fabrication and impact performance of a 3D integrally knitted composite helmet. Journal of Industrial Textiles. 2026;56. doi:10.1177/15280837261507401

BibTeX
@article{Tan2026,
  author = {Tan, Jiangtao and Yan, Taohai and Li, Xin and Zheng, Peixiao and Xu, Bin and Xu, Aixi and Qin, Bo},
  title = {Fabrication and impact performance of a 3D integrally knitted composite helmet},
  journal = {Journal of Industrial Textiles},
  year = {2026},
  volume = {56},
  doi = {10.1177/15280837261507401}
}
Kostenlos starten →