EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Structure-process-property relationships in conductive knitted fabrics: Effects of knit structure and loop geometry on electrical performance

Hyunjin Kim, Daeyoung Lim

Journal of Industrial Textiles · 2026-11 · 56

DOI: 10.1177/15280837261499146 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Industrial Textiles, online erschienen am 10.11.2026. Verfasst von Hyunjin Kim und 1 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Korea Institute for Advancement of Technology, Korea Institute of Industrial Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The performance of conductive knitted electrodes is governed not only by material properties but also by textile architecture, yet the role of knit structure and loop geometry remains insufficiently understood. This study systematically investigated how knit structure and needle pitch-controlled loop geometry influence the dimensional, morphological, electrical, and mechanical properties of conductive knitted fabrics for dry textile electrode applications. Interlock, shobari-type hybrid rib, and plain jersey structures were produced under varying needle pitch (8.0–10.0 mm) conditions. The results demonstrated that needle pitch and knit architecture jointly determined loop geometry and fabric compactness, which in turn governed conductive contact density and current pathways. As needle pitch increased, conductivity decreased and impedance increased due to reduced contact points and elongated conductive paths. Among the tested samples, the shobari-type hybrid rib at NP = 8.0 mm exhibited the lowest impedance (58.6 Ω at 10 kHz), while maintaining moderate bending stiffness, high stretch recovery, and favorable dimensional stability. In contrast, interlock provided high conductivity but limited flexibility, whereas plain jersey showed high flexibility but poor structural stability. These findings reveal a clear structure-dependent trade-off among electrical performance, conformability, and dimensional stability. Accordingly, this study establishes a structure-process-property relationship for conductive knitted fabrics and identifies low-NP shobari-type hybrid rib as an effective textile architecture for pre-interface optimization of knitted dry electrodes.

Förderung

  • Korea Institute for Advancement of Technology
  • Korea Institute of Industrial Technology

Zitieren

APA

Kim, H., & Lim, D. (2026). Structure-process-property relationships in conductive knitted fabrics: Effects of knit structure and loop geometry on electrical performance. Journal of Industrial Textiles, 56. https://doi.org/10.1177/15280837261499146

Vancouver

Kim H, Lim D. Structure-process-property relationships in conductive knitted fabrics: Effects of knit structure and loop geometry on electrical performance. Journal of Industrial Textiles. 2026;56. doi:10.1177/15280837261499146

BibTeX
@article{Kim2026,
  author = {Kim, Hyunjin and Lim, Daeyoung},
  title = {Structure-process-property relationships in conductive knitted fabrics: Effects of knit structure and loop geometry on electrical performance},
  journal = {Journal of Industrial Textiles},
  year = {2026},
  volume = {56},
  doi = {10.1177/15280837261499146}
}
Kostenlos starten →