Three-Dimensional Printing to Guide Fenestrated/Branched TEVAR in Triple Aortic Arch Branch Reconstruction With a Curative Effect Analysis
Journal of Endovascular Therapy · 2024
DOI: 10.1177/15266028231161244 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Endovascular Therapy, 2024. Verfasst von Dong-Sheng Fu und 12 weiteren Autor:innen. Beteiligte Einrichtung: Department of Vascular Surgery, Nanjing Drum Tower Hospital, The Affiliated Hospital of Nanjing University Medical School, Nanjing, China. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Endovascular Procedures, Blood Vessel Prosthesis Implantation, Blood Vessel Prosthesis. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 20 Literaturangaben. Gefördert von: Jiangsu Provincial Key Research and Development Program, Outstanding Youth Project of Nanjing, jiangsu provincial medical youth talent.
Abstract (Originalsprache)
Purpose
To summarize experience with and the efficacy of fenestrated/branched thoracic endovascular repair (F/B-TEVAR) using physician-modified stent-grafts (PMSGs) under 3D printing guidance in triple aortic arch branch reconstruction. Materials and Methods: From February 2018 to April 2022, 14 cases of aortic arch aneurysms and 30 cases of aortic arch dissection (22 acute aortic arch dissection and 8 long-term aortic arch dissection)were treated by F/B-TEVAR in our department, including 34 males and 10 females, with an average age of 59.84 ± 11.72 years. Three aortic arch branches were affected in all patients. A 3D-printed model was made according to computed tomography angiography images and used to guide the fabrication of PMSGs. All patients were followed up.
Results
A total of 132 branches were successfully reconstructed with no case of conversion to open surgery. The average operation time was 4.97 ± 1.40 hours, including a mean 44.05 ± 7.72 minutes for stent-graft customization, the mean postoperative hospitalization duration was 9.91 ± 4.47 days, the average intraoperative blood loss was 480.91 mL (100–2810 mL), and the mean postoperative intensive care unit monitoring duration was 1.02 days (0–5 days). No deaths occurred within 30 days of surgery. Postoperative neurological complications occurred in 1 case (2.3%), and retrograde type A dissection occurred in 1 case (2.3%).
Conclusion
Compared with conventional surgery, triple aortic arch branch reconstruction under the guidance of 3D printing is a minimally invasive treatment method with the advantages of accurate positioning, rapid postoperative recovery, few complications, and reliable short- to mid-term effects. Clinical Impact At present the PMSG usually depend on imaging data and software calculation. With the guidance of 3D printing technology, image data could be transformed into 3D model, which has improved the accuracy of the positioning of the fenestrations. The diameter reduction technique and the internal mini cuff technique have made a complement to the slimed-down fenestration selection process and the low rate of endoleak. As reproducible study, our results may provide reference for TEVAR in different cases.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Vascular Surgery, Nanjing Drum Tower Hospital, The Affiliated Hospital of Nanjing University Medical School, Nanjing, China.
- Center for Composite Materials and Structures, School of Astronautics, Harbin Institute of Technology, Harbin, China.
- Department of Computer Science and Technology, Nanjing University, Nanjing, China.
ORCID-Profile: Zi-He Zhao, Zhao Liu
Förderung
- Jiangsu Provincial Key Research and Development Program
- Outstanding Youth Project of Nanjing
- jiangsu provincial medical youth talent
Zitieren
APA
Fu, D. S., Jin, Y., Zhao, Z. H., Wang, C., Shi, Y. H., Zhou, M. J., Zhao, J. X., Liu, C., Qiao, T., Liu, C. J., Li, X. Q., Li, W. D., & Liu, Z. (2024). Three-Dimensional Printing to Guide Fenestrated/Branched TEVAR in Triple Aortic Arch Branch Reconstruction With a Curative Effect Analysis. Journal of Endovascular Therapy. https://doi.org/10.1177/15266028231161244
Vancouver
Fu DS, Jin Y, Zhao ZH, Wang C, Shi YH, Zhou MJ, et al. Three-Dimensional Printing to Guide Fenestrated/Branched TEVAR in Triple Aortic Arch Branch Reconstruction With a Curative Effect Analysis. Journal of Endovascular Therapy. 2024. doi:10.1177/15266028231161244
BibTeX
@article{Fu2024,
author = {Fu, Dong-Sheng and Jin, Yi and Zhao, Zi-He and Wang, Chao and Shi, Ying-Huan and Zhou, Ming-Jie and Zhao, Jing-Xiong and Liu, Chen and Qiao, Tong and Liu, Chang-Jian and Li, Xiao-Qiang and Li, Wen-Dong and Liu, Zhao},
title = {Three-Dimensional Printing to Guide Fenestrated/Branched TEVAR in Triple Aortic Arch Branch Reconstruction With a Curative Effect Analysis},
journal = {Journal of Endovascular Therapy},
year = {2024},
doi = {10.1177/15266028231161244}
}
EUVIMED