Microscopic mechanism of hydrogen trapping by carbides in Cr-containing oilwell tubes: A first-principles study
Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control · 29.07.2026
DOI: 10.1177/1478422x261460232 ↗Kurz gefasst
Fachartikel in der Zeitschrift Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control, online erschienen am 29.07.2026. Verfasst von Qigui Tan und 6 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Based on density functional theory (DFT), this study focuses on hydrogen-induced damage in Cr-containing tubing steels under H 2 S–CO 2 corrosive environments. Four typical carbides, namely Fe 3 C, Cr 3 C 2 , Cr 7 C 3 , and Cr 23 C 6 , were selected as unified research objects. An atomic-scale analytical framework integrating surface activity, hydrogen adsorption, charge transfer, and energy evolution along linear interpolation paths was established to systematically compare the hydrogen-trapping capability and migration tendency of different carbides. Particular emphasis was placed on revealing the influence mechanism of the Cr atomic coordination environment in Cr-rich carbides on hydrogen adsorption and stable trapping. The results show that the Cr 3 C 2 (001) surface exhibits the highest surface energy of 3.850 J/m 2 , indicating the strongest surface activity and initial hydrogen adsorption tendency. Adsorption energy calculations demonstrate that the Cr-atom-constituted hollow sites on Cr 3 C 2 and Cr 7 C 3 surfaces possess hydrogen adsorption energies as low as −1.204 eV and −1.195 eV, respectively, which are significantly stronger than that of the Fe-hollow site on Fe 3 C (−0.631 eV). In addition, hydrogen atoms tend to occupy multi-atom coordinated concave sites, where stable trapping is achieved through multiple bonding interactions. The linear-interpolation-based path energy scanning results indicate that Cr 3 C 2 can effectively immobilise hydrogen atoms and suppress their penetration into the steel matrix, whereas Cr 7 C 3 can act as a deep trap, driving hydrogen atoms to diffuse into its bulk phase and enabling long-term immobilisation. These findings suggest that Cr 3 C 2 and Cr 7 C 3 play different types of hydrogen-blocking roles in Cr-containing tubing steels, serving as surface-retarding and bulk deep-trap precipitates, respectively. This study provides a theoretical basis for precipitate design in tubing steels resistant to stress corrosion cracking.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Tan, Q., Zhang, H., Zhao, Y., Feng, D., Song, X., Peng, H., & Zhang, L. (2026). Microscopic mechanism of hydrogen trapping by carbides in Cr-containing oilwell tubes: A first-principles study. Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control. https://doi.org/10.1177/1478422x261460232
Vancouver
Tan Q, Zhang H, Zhao Y, Feng D, Song X, Peng H, et al. Microscopic mechanism of hydrogen trapping by carbides in Cr-containing oilwell tubes: A first-principles study. Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control. 2026. doi:10.1177/1478422x261460232
BibTeX
@article{Tan2026,
author = {Tan, Qigui and Zhang, Haibin and Zhao, Yonggang and Feng, Dacheng and Song, Xiaojun and Peng, Haoping and Zhang, Le},
title = {Microscopic mechanism of hydrogen trapping by carbides in Cr-containing oilwell tubes: A first-principles study},
journal = {Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control},
year = {2026},
doi = {10.1177/1478422x261460232}
}
EUVIMED