EUVIMEDEUVIMED entdecken
Crossref

Comparative corrosion behaviour of different alloys for nitric acid service in reprocessing plants

K. Chandra, Sanket Das, Amrita Mahanti Ghosal

Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control · 2025-09 · 60 (6) · 474-487

DOI: 10.1177/1478422x241306374 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control, online erschienen am 20.12.2024. Verfasst von K. Chandra und 2 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 55 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In nuclear spent fuel reprocessing plants in India, austenitic stainless steel (SS) 304L serves as the structural material for critical components that handle boiling nitric acid. SS 304L is prone to intergranular corrosion (IGC) in the transpassive region of the polarisation curve. As a result, there is a need to replace SS 304L with corrosion-resistant alloys of Ti or Zr. In this regard, the corrosion behaviour of two candidate alloys, Ti–Al–Zr and Zircaloy-4, was assessed and compared with SS 304L. The corrosion evaluation was performed using electrochemical tests, corrosion immersion tests in three different phases (liquid, vapour and condensate) of nitric acid, and metallographic examination. Both Ti–Al–Zr and Zircaloy-4 exhibited a broad passivity range of up to 3 V Ag/AgCl in various nitric acid solutions. Based on these investigations, it was concluded that both Ti–Al–Zr and Zircaloy-4 are suitable for use in critical components handling boiling nitric acid with a high concentration of strongly oxidising ions. The corrosion resistance of the three alloys tested was ranked as: Zircaloy-4 > Ti–Al–Zr > SS 304L.

Zitieren

APA

Chandra, K., Das, S., & Ghosal, A. M. (2025). Comparative corrosion behaviour of different alloys for nitric acid service in reprocessing plants. Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control, 60(6), 474-487. https://doi.org/10.1177/1478422x241306374

Vancouver

Chandra K, Das S, Ghosal AM. Comparative corrosion behaviour of different alloys for nitric acid service in reprocessing plants. Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control. 2025;60(6):474-487. doi:10.1177/1478422x241306374

BibTeX
@article{Chandra2025,
  author = {Chandra, K. and Das, Sanket and Ghosal, Amrita Mahanti},
  title = {Comparative corrosion behaviour of different alloys for nitric acid service in reprocessing plants},
  journal = {Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control},
  year = {2025},
  volume = {60},
  number = {6},
  pages = {474--487},
  doi = {10.1177/1478422x241306374}
}
Kostenlos starten →