Vision-based vibration measurement and compound defects feature extraction for rolling bearings based on multi-frequency phase
Structural Health Monitoring · 16.08.2026
DOI: 10.1177/14759217261473501 ↗Kurz gefasst
Fachartikel in der Zeitschrift Structural Health Monitoring, online erschienen am 16.08.2026. Verfasst von Guojin Li und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: The Major Science and Technology Project of Yunnan Province, Yunnan Fundamental Research Projects, Youth Talent Special Project under Yunnan Province Xingdian Talent Support Program.
Abstract (Originalsprache)
High-speed cameras have been widely adopted as a non-contact alternative to conventional contact sensors for mechanical condition monitoring. Traditional image spatial filtering faces two challenges: selecting a appropriate spatial frequency parameter, and phase wrapping caused by the arctangent function’s principal-value interval when encoding displacements from phase differences. To overcome these issues, a vision-based phase motion analysis method using a complex-valued steerable pyramid decomposition is presented for measuring bearing vibration signals. By constructing multiple sets of complex-valued filters to extract sequential image phase information at different spatial frequencies and orientations, and then jointly solving the phases, the problems of temporal wrapping and spatial discontinuity are resolved. To handle the unknown coupling relationships in compound faults of rolling bearings, a periodic-reconstruction-enhanced fast nonlinear blind deconvolution method is proposed. A periodic enhancement and reconstruction mechanism is incorporated into the fast nonlinear blind deconvolution algorithm to enhance impulse trains of each fault period, and then defect characteristic frequencies are obtained via envelope demodulation. For the two parameters in the blind deconvolution algorithm that are sensitive to the results, namely the filter length and the deconvolution period, the envelope autocorrelation function is used to analyze the impulse period. Then, under the determined deconvolution period, the optimal filter length is selected using the minimum multi-scale permutation entropy as the criterion. Through experiments, the inner race and outer race defect features were successfully separated and extracted from the vision-measured compound fault signal of the bearing. Additionally, the advantages of the proposed methods were fully validated through different illumination experiments and comparisons with various other methods. This work provides a solution for non-contact condition monitoring.
Förderung
- The Major Science and Technology Project of Yunnan Province
- Yunnan Fundamental Research Projects
- Youth Talent Special Project under Yunnan Province Xingdian Talent Support Program
Zitieren
APA
Li, G., Zhou, J., Liu, X., & Wu, X. (2026). Vision-based vibration measurement and compound defects feature extraction for rolling bearings based on multi-frequency phase. Structural Health Monitoring. https://doi.org/10.1177/14759217261473501
Vancouver
Li G, Zhou J, Liu X, Wu X. Vision-based vibration measurement and compound defects feature extraction for rolling bearings based on multi-frequency phase. Structural Health Monitoring. 2026. doi:10.1177/14759217261473501
BibTeX
@article{Li2026,
author = {Li, Guojin and Zhou, Jun and Liu, Xiaoqin and Wu, Xing},
title = {Vision-based vibration measurement and compound defects feature extraction for rolling bearings based on multi-frequency phase},
journal = {Structural Health Monitoring},
year = {2026},
doi = {10.1177/14759217261473501}
}
EUVIMED