EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Split cycle engine experiments and modelling with port hydrogen for sustainable propulsion

Angad Panesar, Elisa Wylie

International Journal of Engine Research · 26.06.2026

DOI: 10.1177/14680874261461065 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Engine Research, online erschienen am 26.06.2026. Verfasst von Angad Panesar und 1 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: APC UK Ltd., Royal Academy of Engineering.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Decarbonising the heavy-duty sector requires concepts that surpass the diesel cycle in efficiency while meeting increasingly stringent emissions standards. The recuperated split-cycle engine (RSCE) offers a potential pathway, combining quasi-isothermal compression (enabled with secondary working fluids, SWF) with internal exhaust heat recuperation. This work assesses hydrogen-diesel dual fuelling using single-cylinder RSCE experiments at a range of loads, supported by a validated Chemkin-Pro framework. The modelling extended the analysis using a reactor network and multizone model to evaluate high-load conditions, pre-ignition mixing and SWF carry-over. Experiments show stable dual-fuel operation, with light and controllable pre-ignition linked to elevated HO 2 /H 2 O 2 /OH radicals. Model predictions at higher load indicate that, relative to a neat diesel baseline, BMEP is predicted to be maintained, with BSFC and CO 2 reduced by 33% and 43% at 10%Vol H 2 . NOx is predicted to decrease by 23% at 5%Vol H 2 , but to increase by 42% at 10%Vol H 2 , as the H 2 energy share approaches 40%, consistent with faster premixed heat release and elevated O/OH driving thermal-NO. With efficient aftertreatment conversion, the 5%Vol case is predicted to meet 0.2 g/kWh NOx, whilst 10%Vol remains within the 0.26 g/kWh on-road benchmark. Furthermore, the model predicts that adding H 2 O to the charge (SWF carry-over) could reduce NOx by 30% at 0.10% H 2 O with a 3% BMEP penalty alongside an increase in HC due to temperature-limited oxidation. This combined experimental demonstration of expander port-injected H 2 in an RSCE, supported by a physically informed spatially resolved multizone modelling framework, supports the combustion feasibility for hydrogen-diesel dual fuelling and identifies the calibration and hardware levers required to achieve practical impact for Euro 7-class NOx alongside EU CO 2 reductions. Overall, these results position RSCE + H 2 as a potential mid-term route towards sustainable heavy-duty propulsion.

Förderung

  • APC UK Ltd.
  • Royal Academy of Engineering

Zitieren

APA

Panesar, A., & Wylie, E. (2026). Split cycle engine experiments and modelling with port hydrogen for sustainable propulsion. International Journal of Engine Research. https://doi.org/10.1177/14680874261461065

Vancouver

Panesar A, Wylie E. Split cycle engine experiments and modelling with port hydrogen for sustainable propulsion. International Journal of Engine Research. 2026. doi:10.1177/14680874261461065

BibTeX
@article{Panesar2026,
  author = {Panesar, Angad and Wylie, Elisa},
  title = {Split cycle engine experiments and modelling with port hydrogen for sustainable propulsion},
  journal = {International Journal of Engine Research},
  year = {2026},
  doi = {10.1177/14680874261461065}
}
Kostenlos starten →