EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of a semi-empirical physical model for transient NO x emissions prediction from a high-speed diesel engine

Abdullah Bajwa, Gongyi Zou, Fengyu Zhong iD, Xiaohang Fang iD, Felix Leach iD, Martin Davy iD

International Journal of Engine Research · 2024-10 · 25 (10) · 1835-1848

DOI: 10.1177/14680874241255165 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Engine Research, online erschienen am 18.06.2024. Verfasst von Abdullah Bajwa und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Science, University of Oxford, Oxford, UK. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, Natural Sciences and Engineering Research Council of Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With emissions regulations becoming increasingly restrictive and the advent of real driving emissions limits, control of engine-out NO x emissions remains an important research topic for diesel engines. Progress in experimental engine development and computational modelling has led to the generation of a large amount of high-fidelity emissions and in-cylinder data, making it attractive to use data-driven emissions prediction and control models. While pure data-driven methods have shown robustness in NO x prediction during steady-state engine operation, deficiencies are found under transient operation and at engine conditions far outside the training range. Therefore, physics-based, mean value models that capture cyclic-level changes in in-cylinder thermo-chemical properties appear as an attractive option for transient NO x emissions modelling. Previous experimental studies have highlighted the existence of a very strong correlation between peak cylinder pressure and cyclic NO x emissions. In this study, a cyclic peak pressure-based semi-empirical NO x prediction model is developed. The model is calibrated using high-speed NO and NO 2 emissions measurements during transient engine operation and then tested under different transient operating conditions. The transient performance of the physical model is compared to that of a previously developed data-driven (artificial neural network) model, and is found to be superior, with a better dynamic response and low (

Schlagwörter

Stichwörter der Autor:innen

NOxSemi-empirical NOx modelartificial neural networkscrank-angle resolved NOxdieselinternal combustion enginestransient

Autor:innen und Institutionen

  • Department of Engineering Science, University of Oxford, Oxford, UK.
  • Department of Mechanical & Manufacturing Engineering, Schulich School of Engineering, University of Calgary, Calgary, AB, Canada.

ORCID-Profile: Fengyu Zhong, Xiaohang Fang, Felix Leach, Martin Davy

Förderung

  • Engineering and Physical Sciences Research Council
  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Bajwa, A., Zou, G., Zhong, F., Fang, X., Leach, F., & Davy, M. (2024). Development of a semi-empirical physical model for transient NO x emissions prediction from a high-speed diesel engine. International Journal of Engine Research, 25(10), 1835-1848. https://doi.org/10.1177/14680874241255165

Vancouver

Bajwa A, Zou G, Zhong F, Fang X, Leach F, Davy M. Development of a semi-empirical physical model for transient NO x emissions prediction from a high-speed diesel engine. International Journal of Engine Research. 2024;25(10):1835-1848. doi:10.1177/14680874241255165

BibTeX
@article{Bajwa2024,
  author = {Bajwa, Abdullah and Zou, Gongyi and Zhong, Fengyu and Fang, Xiaohang and Leach, Felix and Davy, Martin},
  title = {Development of a semi-empirical physical model for transient NO x emissions prediction from a high-speed diesel engine},
  journal = {International Journal of Engine Research},
  year = {2024},
  volume = {25},
  number = {10},
  pages = {1835--1848},
  doi = {10.1177/14680874241255165}
}
Kostenlos starten →