EUVIMEDEUVIMED entdecken
Crossref

Effect of hybrid nano-fillers on the mechanical, thermal and viscoelastic properties of epoxy-based polymer composites for progressive applications

Deeban Booramurthy, Sreenivas Pakkeeri, Sulur Loganathan Pradeep Kumar, Baranitharan Paramasivam, Malinee Sriariyanun

Plastics, Rubber and Composites: Macromolecular Engineering · 2026-12 · 55 (9-10) · 269-279

DOI: 10.1177/14658011261463952 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Plastics, Rubber and Composites: Macromolecular Engineering, online erschienen am 06.07.2026. Verfasst von Deeban Booramurthy und 4 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben. Gefördert von: King Mongkut’s University of Technology North Bangkok and the National Science, Research and Innovation Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Epoxy resins are widely used in aerospace, electronics and structural applications because of their excellent mechanical strength, chemical resistance and dimensional stability; however, their inherent brittleness and limited thermal resistance restrict broader multifunctional use. In this study, multifunctional epoxy nanocomposites were developed using hybrid nano-fillers consisting of silica (SiO 2 ), alumina (Al 2 O 3 ) and carbon black (CB) at a fixed total filler loading of 1 wt% with controlled hybrid ratios (1:1, 1:4 and 4:1). Surface functionalisation of the fillers using APTES, γ-methacryloxypropyltrimethoxysilane (γ-MPS) and TEPA treatments improved filler dispersion and interfacial compatibility within the epoxy matrix. Dynamic mechanical analysis revealed an increase in glass transition temperature (Tg) of up to 18 °C compared with neat epoxy, while thermogravimetric analysis showed improved thermal stability with a 22–42 °C increase in T5% degradation temperature and enhanced residual char formation. Scanning electron microscopy fracture analysis demonstrated rougher fracture morphology, reduced micro-void formation, crack-path deviation and improved filler–matrix adhesion in the hybrid systems. Fourier-transform infrared analysis further confirmed successful interfacial interactions through Si–O, carbonyl and hydroxyl-associated bonding features. Among the investigated systems, CB–Al 2 O 3 hybrids exhibited superior flexural and thermal performance, whereas CB–SiO 2 hybrids demonstrated enhanced indentation resistance and viscoelastic stability. The results indicate that surface-engineered hybrid nano-fillers provide an effective and scalable strategy for simultaneously improving the mechanical, thermal and viscoelastic behaviour of epoxy composites for lightweight structural and thermally demanding engineering applications.

Förderung

  • King Mongkut’s University of Technology North Bangkok and the National Science, Research and Innovation Fund

Zitieren

APA

Booramurthy, D., Pakkeeri, S., Kumar, S. L. P., Paramasivam, B., & Sriariyanun, M. (2026). Effect of hybrid nano-fillers on the mechanical, thermal and viscoelastic properties of epoxy-based polymer composites for progressive applications. Plastics, Rubber and Composites: Macromolecular Engineering, 55(9-10), 269-279. https://doi.org/10.1177/14658011261463952

Vancouver

Booramurthy D, Pakkeeri S, Kumar SLP, Paramasivam B, Sriariyanun M. Effect of hybrid nano-fillers on the mechanical, thermal and viscoelastic properties of epoxy-based polymer composites for progressive applications. Plastics, Rubber and Composites: Macromolecular Engineering. 2026;55(9-10):269-279. doi:10.1177/14658011261463952

BibTeX
@article{Booramurthy2026,
  author = {Booramurthy, Deeban and Pakkeeri, Sreenivas and Kumar, Sulur Loganathan Pradeep and Paramasivam, Baranitharan and Sriariyanun, Malinee},
  title = {Effect of hybrid nano-fillers on the mechanical, thermal and viscoelastic properties of epoxy-based polymer composites for progressive applications},
  journal = {Plastics, Rubber and Composites: Macromolecular Engineering},
  year = {2026},
  volume = {55},
  number = {9-10},
  pages = {269--279},
  doi = {10.1177/14658011261463952}
}
Kostenlos starten →