EUVIMEDEUVIMED entdecken
Crossref

Carbon black and calcium lignosulphonate reinforced rubber composites with applied plasticiser glycerol

Ján Kruželák, Michaela Džuganová, Andrea Kvasničáková, Ján Hronkovič, Jozef Preťo, Ivan Chodák, Ivan Hudec

Plastics, Rubber and Composites: Macromolecular Engineering · 2025-09 · 54 (6-7) · 228-245

DOI: 10.1177/14658011251344072 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Plastics, Rubber and Composites: Macromolecular Engineering, online erschienen am 21.05.2025. Verfasst von Ján Kruželák und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: Agentúra na Podporu Výskumu a Vývoja.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rubber compounds based on styrene–butadiene rubber (SBR) and acrylonitrile–butadiene rubber (NBR) were filled with constant amount of carbon black – 25 phr and calcium lignosulphonate – 30 phr. Glycerol as cheap and environmentally friendly softener was added into the rubber compounds in concentration scale from 0 to 20 phr to plasticise the rubber matrix and the biopolymer and to improve the adhesion between the components of rubber compounds. The results revealed that the addition of glycerol resulted in the decrease of rubber compounds viscosity. Based on dynamical-mechanical analysis it can be concluded that glycerol softened lignosulphonate and lowered its glass transition temperature. The softened lignosulphonate was better distributed and dispersed within the rubber matrices, which was clearly demonstrated by performing scanning electron microscopy. Glycerol contributed to better adhesion and compatibility between the rubber and the biopolymer, which was subsequently reflected in improvement of tensile behaviour of composites. Both elongation at break and tensile strength showed increasing trend with increasing amount of glycerol. Due to compatibility in polarity among rubber matrix, biopolymer and plasticiser, higher tensile strength, and higher enhancement of tensile strength in dependence on glycerol content exhibited composites based on NBR. When compared to the reference, the tensile strength increased in more than 5 MPa for composites plasticised with high amount of glycerol. The improvement in tensile strength of SBR-based composites was less evident, though still pointing to a positive effect of glycerol on increasing of adhesion and compatibility on the filler-rubber interface. The main point of the work was to show that improvement of the composites’ properties can be achieved by addition of suitable plasticiser into the rubber compounds with applied biopolymer without additional cost and time-consuming treatment procedures.

Förderung

  • Agentúra na Podporu Výskumu a Vývoja

Zitieren

APA

Kruželák, J., Džuganová, M., Kvasničáková, A., Hronkovič, J., Preťo, J., Chodák, I., & Hudec, I. (2025). Carbon black and calcium lignosulphonate reinforced rubber composites with applied plasticiser glycerol. Plastics, Rubber and Composites: Macromolecular Engineering, 54(6-7), 228-245. https://doi.org/10.1177/14658011251344072

Vancouver

Kruželák J, Džuganová M, Kvasničáková A, Hronkovič J, Preťo J, Chodák I, et al. Carbon black and calcium lignosulphonate reinforced rubber composites with applied plasticiser glycerol. Plastics, Rubber and Composites: Macromolecular Engineering. 2025;54(6-7):228-245. doi:10.1177/14658011251344072

BibTeX
@article{Kruelk2025,
  author = {Kruželák, Ján and Džuganová, Michaela and Kvasničáková, Andrea and Hronkovič, Ján and Preťo, Jozef and Chodák, Ivan and Hudec, Ivan},
  title = {Carbon black and calcium lignosulphonate reinforced rubber composites with applied plasticiser glycerol},
  journal = {Plastics, Rubber and Composites: Macromolecular Engineering},
  year = {2025},
  volume = {54},
  number = {6-7},
  pages = {228--245},
  doi = {10.1177/14658011251344072}
}
Kostenlos starten →