pH as a critical parameter governing the deposition kinetics, microstructure, phase evolution, and corrosion resistance of Zn–Mo thin films
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications · 19.11.2026
DOI: 10.1177/14644207261508394 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, online erschienen am 19.11.2026. Verfasst von Shailja Singh und 7 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben.
Abstract (Originalsprache)
Electrodeposited Zn–Mo films are promising, eco-friendly alternative to conventional Zn-based films owing to their superior corrosion resistance and mechanical stability. The influence of pH on the deposition mechanism and properties of Zn-Mo films has not been established yet. In this study, the pH was varied from 3.5 to 7.5 to evaluate its effects on deposition behaviour, structural characteristics, and corrosion performance. XRD results confirmed the formation of hcp Zn–Mo structure. Meanwhile, increasing the pH promoted lattice distortion, and a preferred orientation transition from the (100) to the (101) plane. FESEM–EDS analysis revealed an increment in the amount of Mo content in the films reaching to maximum of 43.7 wt% accompanied by enhanced oxygen incorporation indicating formation of Zn and Mo oxides/hydroxides species at higher pH. XPS survey spectra confirmed Zn, Mo, and O, while high-resolution Mo 3d spectra identified the presence of Mo 0 , Mo 4+ , and Mo 6+ . Tafel analysis demonstrated that films deposited at lower bath pH (3.5 to 5.5) exhibited better and long-term corrosion resistance with R p ranging from 9.70 to 17.33 kΩ cm 2 after 30 days of immersion, whereas EIS confirmed higher polarization resistance of the Zn-Mo thin films than zinc film and the bare substrate.
Zitieren
APA
Singh, S., Gangwar, S., Yadav, C. S., Choudhary, S. K., Negi, D. S., Sharma, S., Kumar, S., & Khatri, M. S. (2026). pH as a critical parameter governing the deposition kinetics, microstructure, phase evolution, and corrosion resistance of Zn–Mo thin films. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. https://doi.org/10.1177/14644207261508394
Vancouver
Singh S, Gangwar S, Yadav CS, Choudhary SK, Negi DS, Sharma S, et al. pH as a critical parameter governing the deposition kinetics, microstructure, phase evolution, and corrosion resistance of Zn–Mo thin films. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2026. doi:10.1177/14644207261508394
BibTeX
@article{Singh2026,
author = {Singh, Shailja and Gangwar, Sunil and Yadav, C S and Choudhary, Sumit Kumar and Negi, Devendra Singh and Sharma, Shivani and Kumar, Sanjeev and Khatri, Manvendra Singh},
title = {pH as a critical parameter governing the deposition kinetics, microstructure, phase evolution, and corrosion resistance of Zn–Mo thin films},
journal = {Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications},
year = {2026},
doi = {10.1177/14644207261508394}
}
EUVIMED