EUVIMEDEUVIMED entdecken
Crossref

A novel arch-based design strategy for strengthening BCC lattice structures

Fatma Elwasli, Slah Mzali, Safa Harzallah, Mohamed Abid, Karl Delbe, Salah Mezlini

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications · 16.11.2026

DOI: 10.1177/14644207261507253 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, online erschienen am 16.11.2026. Verfasst von Fatma Elwasli und 5 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lattice structures are porous cellular materials characterized by an excellent strength-to-weight ratio. The wide range of controllable parameters — including unit-cell design, tessellation strategy, relative density, and material properties — offers extensive flexibility in tailoring mechanical behavior, enabling application-specific solutions for automotive, aerospace, and biomedical engineering. This study adopts a design-based approach in which arch-shaped struts are added to the conventional Body-Centered Cubic (BCC) lattice to enhance mechanical performance. Several arch configurations are investigated, encompassing arch type (concave and convex), arch angle (0°, 15°, 30°, 45°, and 60°), and arch diameter (1, 1.5, and 2 mm). All configurations were fabricated from polylactic acid (PLA) via fused deposition modeling (FDM) and subjected to compression testing to evaluate the influence of arch geometry on Young's modulus, maximum compressive force, energy absorption, and failure mechanisms. Results demonstrate that arch incorporation substantially affects both mechanical properties and failure behavior. The greatest enhancement in maximum compressive force relative to the BCC reference was recorded for a convex arch at 15° and 2 mm diameter, yielding a 1961% increase. Reducing the diameter to 1 mm decreased this improvement to 208%. Regarding Young's modulus, the effect of arch angle is more pronounced in concave configurations regardless of diameter. The influence of concave versus convex geometry on Young's modulus depends on the arch angle: a 34% improvement was observed transitioning from concave to convex at 15° and 2 mm diameter, while a substantially greater enhancement of 185% was recorded at 60° under the same geometric transition.

Zitieren

APA

Elwasli, F., Mzali, S., Harzallah, S., Abid, M., Delbe, K., & Mezlini, S. (2026). A novel arch-based design strategy for strengthening BCC lattice structures. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. https://doi.org/10.1177/14644207261507253

Vancouver

Elwasli F, Mzali S, Harzallah S, Abid M, Delbe K, Mezlini S. A novel arch-based design strategy for strengthening BCC lattice structures. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2026. doi:10.1177/14644207261507253

BibTeX
@article{Elwasli2026,
  author = {Elwasli, Fatma and Mzali, Slah and Harzallah, Safa and Abid, Mohamed and Delbe, Karl and Mezlini, Salah},
  title = {A novel arch-based design strategy for strengthening BCC lattice structures},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications},
  year = {2026},
  doi = {10.1177/14644207261507253}
}
Kostenlos starten →