EUVIMEDEUVIMED entdecken
Crossref

A novel manufacturing process for testing and adhesive joining of full culm bamboo

Yannic Windeln, Markus Schleser, Stephan Kallweit, Alexander Schwarz

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications · 21.07.2026

DOI: 10.1177/14644207261471291 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, online erschienen am 21.07.2026. Verfasst von Yannic Windeln und 3 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Gefördert von: Bundesministerium für Wirtschaft und Energie, Graduate School for Applied Research in North Rhine-Westphalia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Full culm bamboo, a fast-growing, lightweight material with a high strength-to-density ratio, is suitable for replacing metal and plastic tubes in various applications. However, hardly any industrial application of full culm bamboo can be found today. The reasons are the highly variable geometry, low shear strength, labour-intensive manufacturing processes, and a lack of load-bearing joining methods. To enhance scalability, we conducted an industrial case study on an automatable production process for prefabricated bamboo tubes. The outer geometry of the bamboo culms was determined using a fast deep convolutional neural network (< 2 s for a culm of 2 m length), accurate 2D laser triangulation (∼ 0.01 mm spatial resolution) and digital image correlation. The derived 3D model of the culm was used for additive manufacturing of adhesive joints adapted to the bamboo geometry (83% reduction in the required amount of adhesive). Different surface treatment methods - sanding, brushing, drilling, and abrasive blasting - were tested for the resulting bonding strength (up to 16 MPa, capable of transferring tensile loads of about 68% of a bamboo culm's capacity). The manufacturing process produces economically friendly, cost-effective prefabricated bamboo tubes, even for structural applications with high mechanical requirements.

Förderung

  • Bundesministerium für Wirtschaft und Energie
  • Graduate School for Applied Research in North Rhine-Westphalia

Zitieren

APA

Windeln, Y., Schleser, M., Kallweit, S., & Schwarz, A. (2026). A novel manufacturing process for testing and adhesive joining of full culm bamboo. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. https://doi.org/10.1177/14644207261471291

Vancouver

Windeln Y, Schleser M, Kallweit S, Schwarz A. A novel manufacturing process for testing and adhesive joining of full culm bamboo. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2026. doi:10.1177/14644207261471291

BibTeX
@article{Windeln2026,
  author = {Windeln, Yannic and Schleser, Markus and Kallweit, Stephan and Schwarz, Alexander},
  title = {A novel manufacturing process for testing and adhesive joining of full culm bamboo},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications},
  year = {2026},
  doi = {10.1177/14644207261471291}
}
Kostenlos starten →