Effects of preheating and alloying elements on the 7B55-Sc alloy processed via laser directed energy deposition
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications · 20.05.2026
DOI: 10.1177/14644207261453536 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, online erschienen am 20.05.2026. Verfasst von Fangyu Zhao und 7 weiteren Autor:innen. Die Arbeit nennt 62 Literaturangaben. Gefördert von: fundamental research funds for the universities of Liaoning province.
Abstract (Originalsprache)
The effects of preheating temperature and the addition of alloying elements (specifically, Scandium and Zirconium) on the microstructure and defects of Al-Zn-Mg-Cu alloys during laser-directed energy deposition (LDED) are investigated. The result shows that preheating (280 °C) effectively suppressed crack formation, and 7b55-Sc alloy was successfully obtained under the following parameters: laser power of 2000 W, powder feed rate of 0.2 L/min, and scanning speed of 500 mm/min. Microstructural analysis demonstrated that the addition of Sc and Zr facilitated the formation of Al 3 Sc and Al 3 (Sc, Zr) precipitates in the matrix. The resulting average equiaxed grain sizes measured 7.64 μm in the YOZ direction and 8.43 μm in the XOZ direction. In addition, a large number of continuous eutectic structures precipitate along the grain boundaries, and the second phase precipitated within the grains mainly consists of η phase and η′ phase. Mechanical testing indicated a longitudinal tensile strength of 330.2 MPa with 3.89% elongation, and a transverse tensile strength of 325.6 MPa with 4.76% elongation. The high-quality production of LDED 7b55-Sc alloy will provide strong support for the processing and manufacturing of lightweight, high-strength components in the aerospace industry.
Förderung
- fundamental research funds for the universities of Liaoning province
Zitieren
APA
Zhao, F., Guo, X., Shi, B., Xu, C., Li, X., Yang, Y., Zhu, Z., & Xu, R. (2026). Effects of preheating and alloying elements on the 7B55-Sc alloy processed via laser directed energy deposition. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. https://doi.org/10.1177/14644207261453536
Vancouver
Zhao F, Guo X, Shi B, Xu C, Li X, Yang Y, et al. Effects of preheating and alloying elements on the 7B55-Sc alloy processed via laser directed energy deposition. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2026. doi:10.1177/14644207261453536
BibTeX
@article{Zhao2026,
author = {Zhao, Fangyu and Guo, Xuming and Shi, Bin and Xu, Changshan and Li, Xiaoyi and Yang, Yu and Zhu, Zhi and Xu, Rongzheng},
title = {Effects of preheating and alloying elements on the 7B55-Sc alloy processed via laser directed energy deposition},
journal = {Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications},
year = {2026},
doi = {10.1177/14644207261453536}
}
EUVIMED