Dual-rigid-body dynamic modeling and prototype-based validation of a 3-UPRP+UP parallel platform
Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics · 11.11.2026
DOI: 10.1177/14644193261501429 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, online erschienen am 11.11.2026. Verfasst von Fengrui Yang und 1 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben.
Abstract (Originalsprache)
A kinematic and dual-rigid-body dynamic framework is developed for a three-degree-of-freedom 3-UPRP+UP parallel platform. Structural offset and passive slider motion are embedded in closed-form limb constraints, yielding inverse and numerical forward kinematics, an actuator-rate Jacobian, and a stroke-constrained workspace. The Jacobian differs from central finite differences by at most 1.01 × 10 − 7 mm / rad , and actuator lengths differ from MSC Adams by at most 0.00484 mm. The DRB inverse-dynamics model separates the lower swing frame from the upper moving platform and retains the peripheral cylinder, rod, and slider bodies. Generalized-force RMSEs against MSC Adams are 0.0134 N ⋅ m , 0.0105 N ⋅ m and 2.76 × 10 − 5 N for roll, pitch, and relative heave; a single-rigid-body model raises the heave error to 102.59 N. A DRB-based computed-torque controller with preload-centered allocation is formulated, with nominal exponential stability and uniform ultimate boundedness under bounded disturbances. Co-simulation gives amplitude ratios of 0.9090, 0.9371, and 0.8483. Prototype tests are limited to geometric calibration, static pitch validation, and single-axis vertical-acceleration comparison. The static pitch and acceleration RMSEs are 0.0869 ∘ and 0.1647 m / s 2 , respectively, with an acceleration correlation coefficient of 0.8543. The full controller is evaluated only on the virtual prototype.
Zitieren
APA
Yang, F., & Tang, G. (2026). Dual-rigid-body dynamic modeling and prototype-based validation of a 3-UPRP+UP parallel platform. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics. https://doi.org/10.1177/14644193261501429
Vancouver
Yang F, Tang G. Dual-rigid-body dynamic modeling and prototype-based validation of a 3-UPRP+UP parallel platform. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics. 2026. doi:10.1177/14644193261501429
BibTeX
@article{Yang2026,
author = {Yang, Fengrui and Tang, Gang},
title = {Dual-rigid-body dynamic modeling and prototype-based validation of a 3-UPRP+UP parallel platform},
journal = {Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics},
year = {2026},
doi = {10.1177/14644193261501429}
}
EUVIMED