EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Development and calibration of a multi-segment 15-DOF biomechanical model for predicting seat and backrest apparent mass of the seated human body

Shehab Abdulmuneem Alsamawi, Zhifei Zhang, Chenxu Dai, Fengqin Li, Qianqian Chen

Journal of Low Frequency Noise, Vibration and Active Control · 10.11.2026

DOI: 10.1177/14613484261506031 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Low Frequency Noise, Vibration and Active Control, online erschienen am 10.11.2026. Verfasst von Shehab Abdulmuneem Alsamawi und 4 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Backrest inclination significantly influences the biodynamic response of seated occupants under whole-body vibration; however, existing models remain limited in their ability to simultaneously predict apparent mass (APM) responses at both the seat and the backrest across varying postures. This study develops and calibrates a 15-degree-of-freedom (DOF) multibody dynamics (MBD) model of the seated human body to quantify the effect of backrest inclination (0°, 10°, 20°, and 30°) under vertical excitation. The model consists of five rigid segments—thighs, pelvis, lower torso, upper torso, and head–neck—connected through translational and rotational spring–damper joints, with the body-seat and body-backrest interactions represented by translational spring-damper elements at three contact locations. A total of 36 model parameters are identified via a genetic algorithm by minimising the least-squares error between predicted and experimental responses. The model accurately reproduces the vertical apparent mass at the seat across all inclinations, with mean errors below 2.85% and coefficients of determination (R 2 ) exceeding 0.97. The best overall vertical performance occurs at 0°, with a mean error of 1.30%, root-mean-square (RMS) error of 1.70%, and R 2 = 0.997. Strong agreement is also obtained for the normal apparent mass at the backrest, with mean errors below 6.98% and RMS errors below 8.56%. The lowest RMS error and peak error occur at 30°, with RMS error of 6.73% and peak error of 1.15%, while the highest R 2 occurs at 0° with R 2 = 0.972. The fore-aft cross-axis response remains the most difficult to predict, with larger errors than the vertical and normal responses. Its best performance is obtained at 10°, with a mean error of 11.54%, RMS error of 14.70%, and R 2 = 0.947. Across all response directions, the model predicts the primary resonance frequency with errors below 9.65%, indicating reliable resonance prediction over the full range of backrest inclinations. Global sensitivity analyses (GSA) across all four backrest inclinations identified posture-dependent influential parameter subsets. The collective total-order Sobol contribution of the Morris low-sensitivity group remained modest, with a maximum point estimate of 0.091 across the examined responses. Sensitivity-informed recalibration reduced the number of adjustable coefficients from 36 to 13–18, with negligible changes in the objective function relative to the corresponding full 36-parameter calibrations. The model should therefore be interpreted as a condition-specific linear engineering representation calibrated for vertical excitation at 0.5 m/s 2 r.m.s. over 0.5–15 Hz; predictive performance at other excitation magnitudes is not established in the present study.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Alsamawi, S. A., Zhang, Z., Dai, C., Li, F., & Chen, Q. (2026). Development and calibration of a multi-segment 15-DOF biomechanical model for predicting seat and backrest apparent mass of the seated human body. Journal of Low Frequency Noise, Vibration and Active Control. https://doi.org/10.1177/14613484261506031

Vancouver

Alsamawi SA, Zhang Z, Dai C, Li F, Chen Q. Development and calibration of a multi-segment 15-DOF biomechanical model for predicting seat and backrest apparent mass of the seated human body. Journal of Low Frequency Noise, Vibration and Active Control. 2026. doi:10.1177/14613484261506031

BibTeX
@article{Alsamawi2026,
  author = {Alsamawi, Shehab Abdulmuneem and Zhang, Zhifei and Dai, Chenxu and Li, Fengqin and Chen, Qianqian},
  title = {Development and calibration of a multi-segment 15-DOF biomechanical model for predicting seat and backrest apparent mass of the seated human body},
  journal = {Journal of Low Frequency Noise, Vibration and Active Control},
  year = {2026},
  doi = {10.1177/14613484261506031}
}
Kostenlos starten →