EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simulation and experimental study on contact pressure distribution of contact interface in single and double bolted connection structures

Jingsong Xie, Zhengjie Lu, Jianbin Cao, Zhibin Guo, Xiao Kang, Zhikang Zhang, Tiantian Wang

Journal of Low Frequency Noise, Vibration and Active Control · 2024-03 · 43 (1) · 123-143

DOI: 10.1177/14613484231209300 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Low Frequency Noise, Vibration and Active Control, online erschienen am 17.02.2024. Verfasst von Jingsong Xie und 6 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Research Project of Colleges and Universities In Jiangsu Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bolted joints play an important role in aerospace, machinery manufacturing, weapons and other fields, and the contact pressure distribution at the connection interface seriously affects the service performance of the bolts. Contact pressure analysis is an essential basis and reference for structural design, calibration, inspection, and safety monitoring of bolted connection structures. Considering the preload force and frictional contact between the joint components, a block mapping hexahedron mesh generation and finite element modeling method for bolted connections is presented, and the finite element models of single and double bolted structures are constructed. Then, an experimental test platform for measuring contact pressure distribution is constructed. Comparison of finite element analysis results with experimental results for the contact pressure distribution in the single and double-bolted joints; the root mean squared error of contact pressure distribution is less than 5%, which verifies the effectiveness of the finite element models. After that, the models are used to study the contact pressure distribution in single-bolted joints and contact pressure coupling effect of double-bolted joints, and the normal stress distribution features within members and contact pressure distribution contour are revealed for single and double-bolted joint. Finally, the finite element models are adopted to investigate the effects of the clamping length, preload, material properties, hole clearance, and bolt size on contact pressure distribution in single-bolted joints. The coupling effect of contact pressure distribution in double-bolted joints under different preloads and geometric parameters are also examined.

Förderung

  • Natural Science Research Project of Colleges and Universities In Jiangsu Province

Zitieren

APA

Xie, J., Lu, Z., Cao, J., Guo, Z., Kang, X., Zhang, Z., & Wang, T. (2024). Simulation and experimental study on contact pressure distribution of contact interface in single and double bolted connection structures. Journal of Low Frequency Noise, Vibration and Active Control, 43(1), 123-143. https://doi.org/10.1177/14613484231209300

Vancouver

Xie J, Lu Z, Cao J, Guo Z, Kang X, Zhang Z, et al. Simulation and experimental study on contact pressure distribution of contact interface in single and double bolted connection structures. Journal of Low Frequency Noise, Vibration and Active Control. 2024;43(1):123-143. doi:10.1177/14613484231209300

BibTeX
@article{Xie2024,
  author = {Xie, Jingsong and Lu, Zhengjie and Cao, Jianbin and Guo, Zhibin and Kang, Xiao and Zhang, Zhikang and Wang, Tiantian},
  title = {Simulation and experimental study on contact pressure distribution of contact interface in single and double bolted connection structures},
  journal = {Journal of Low Frequency Noise, Vibration and Active Control},
  year = {2024},
  volume = {43},
  number = {1},
  pages = {123--143},
  doi = {10.1177/14613484231209300}
}
Kostenlos starten →