EUVIMEDEUVIMED entdecken
Crossref

Load-bearing performance of curved-pultruded GFRP square tube-metal hybrid emergency bridge: Experimental and numerical investigations

Zecheng Tong, Chenglin Liu, Feng Li, Jia Chen

Advances in Structural Engineering · 30.10.2026

DOI: 10.1177/13694332261503976 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Structural Engineering, online erschienen am 30.10.2026. Verfasst von Zecheng Tong und 3 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Gefördert von: Higher Education Basic Science (Natural Science) Project of Jiangsu Province, Natural Science Foundation of Jiangsu Province of China, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Extreme events often disrupt transportation networks and create an urgent need for lightweight, rapidly deployable emergency bridges. To overcome the high self-weight, corrosion susceptibility, and limited deployment efficiency of conventional steel systems, and to resolve the stiffness-assembly efficiency trade-off in existing fiber-reinforced polymer (FRP) emergency bridges, this study proposes and experimentally evaluates a curved-pultruded glass fiber-reinforced polymer (GFRP) square-tube-metal hybrid emergency bridge. In the proposed system, arch-shaped curved-pultruded GFRP square tubes enhance structural stiffness through geometric arch action, whereas modular joints using pre-tightened tooth connections (PTTCs) and single-lug-and-yoke-plate (SLYP) joints enable rapid assembly. Three-point bending tests were performed under four representative SLYP pin configurations within the elastic stage, followed by an ultimate failure test on the symmetric 3-pin configuration, with pins installed in Girders 1, 3, and 5. The results demonstrate that pin configuration governs the global stiffness and transverse load-sharing behavior of the bridge. Specifically, increasing the number of pins improves stiffness by enhancing tensile-force transfer and rotational restraint between adjacent girders, whereas a more uniform pin layout promotes better transverse force coordination. Ultimate failure was governed by local buckling and matrix compression damage near the GFRP arch-foot region, with no evident damage in the PTTCs or bolt-hole areas. A validated finite element (FE) model agreed well with the experimental results in terms of ultimate bearing capacity, and parametric analyses further confirmed that uniform pin arrangements delay the onset of local buckling and improve global structural stability. The proposed system therefore offers a promising solution for short-span composite emergency bridges.

Förderung

  • Higher Education Basic Science (Natural Science) Project of Jiangsu Province
  • Natural Science Foundation of Jiangsu Province of China
  • National Key Research and Development Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Tong, Z., Liu, C., Li, F., & Chen, J. (2026). Load-bearing performance of curved-pultruded GFRP square tube-metal hybrid emergency bridge: Experimental and numerical investigations. Advances in Structural Engineering. https://doi.org/10.1177/13694332261503976

Vancouver

Tong Z, Liu C, Li F, Chen J. Load-bearing performance of curved-pultruded GFRP square tube-metal hybrid emergency bridge: Experimental and numerical investigations. Advances in Structural Engineering. 2026. doi:10.1177/13694332261503976

BibTeX
@article{Tong2026,
  author = {Tong, Zecheng and Liu, Chenglin and Li, Feng and Chen, Jia},
  title = {Load-bearing performance of curved-pultruded GFRP square tube-metal hybrid emergency bridge: Experimental and numerical investigations},
  journal = {Advances in Structural Engineering},
  year = {2026},
  doi = {10.1177/13694332261503976}
}
Kostenlos starten →