EUVIMEDEUVIMED entdecken
Crossref

Experimental study on flexural performance and deflection calculation of UHPC-NC composite beams

Biao Liu, Qiuwei Wang, Qingxuan Shi, Feng Huang

Advances in Structural Engineering · 11.07.2026

DOI: 10.1177/13694332261470083 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Structural Engineering, online erschienen am 11.07.2026. Verfasst von Biao Liu und 3 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Gefördert von: Shaanxi Natural Science Basic Research Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Based on the excellent mechanical properties of UHPC such as high strength and good toughness, UHPC is used to replace part of NC in the mid-span of beams to form an UHPC-NC composite beam, a design that optimizes both the cost and mechanical properties of the composite beam. The effect of the ratio of UHPC length to calculated span ( L u / L ) on the performance of the composite beams in terms of crack load, peak load, mid-span deflection and stiffness was investigated by four-point flexural tests. The study shows that (1) the peak load of full UHPC beam (UB) is 40.2% higher than that of the NB beam, and peak loads of composite beams UN-HB1, UN-HB2 and UN-HB3 can reach 79.8%, 97.6% and 98.7% of the peak load of the UB beam, respectively. (2) Composite beams with larger L u / L have better deformation capacity, the ductility of UN-HB1 is 22.1% higher than that of NB. (3) The stiffnesses of composite beams UN-HB2 and UN-HB3 increased by 31.7% and 34.2% beam NB, and they were able to reach 83.2% and 84.3% of the stiffness of UB beam. (4) UHPC length ratio of 50% ( L u / L = 0.5) enables the composite beam to achieve satisfactory flexural performance. A calculation model is derived based on variable stiffness non-equal section beams and immediate stiffness, which can accurately predict the mid-span deflection of the composite beams.

Förderung

  • Shaanxi Natural Science Basic Research Program

Zitieren

APA

Liu, B., Wang, Q., Shi, Q., & Huang, F. (2026). Experimental study on flexural performance and deflection calculation of UHPC-NC composite beams. Advances in Structural Engineering. https://doi.org/10.1177/13694332261470083

Vancouver

Liu B, Wang Q, Shi Q, Huang F. Experimental study on flexural performance and deflection calculation of UHPC-NC composite beams. Advances in Structural Engineering. 2026. doi:10.1177/13694332261470083

BibTeX
@article{Liu2026,
  author = {Liu, Biao and Wang, Qiuwei and Shi, Qingxuan and Huang, Feng},
  title = {Experimental study on flexural performance and deflection calculation of UHPC-NC composite beams},
  journal = {Advances in Structural Engineering},
  year = {2026},
  doi = {10.1177/13694332261470083}
}
Kostenlos starten →